[1] F. Barandar, M. Elyasi, M. J. Mirnia, and R. Jamaati, "The effect of surface shape on the production of aluminum-copper two layer tubes using forward extrusion process," (in persian),
Iranian Journal of Manufacturing Engineering, vol. 6, no. 8, pp. 1-9,2020, doi:
https://doi.org/10.1016/j.msea.2014.01.025.
[2] K. Y. Rhee, W. Y. Han, H. J. Park, and S. S. Kim, "Fabrication of aluminum/copper clad composite using hot hydrostatic extrusion process and its material characteristics,"
Materials Science and Engineering: A, vol. 384, pp. 70-76, 2004, doi:
http://doi.org/10.1016/j.msea.2004.05.051.
[3] H.-f. Wang, J.-t. Han, and Q.-l. Hao, "Fabrication of laminated-metal composite tubes by multi-billet rotary swaging technique,"
The International Journal of Advanced Manufacturing Technology, vol. 76, no. 1, pp. 713-719, 2015, doi:
http://doi.org/10.1007/s00170-014-6302-9.
[4] C. Wang, B. Zhang, D. Yao, Z. Tian, and C. Zhao, "Study of Copper/Aluminum Bimetallic Tube Rotary Ring Spinning Composite Forming Characteristics,"
Applied Sciences, vol. 13, no. 8, p. 4727, 2023, doi:
https://doi.org/10.3390/app13084727.
[5] A. Tajyar and A. Masoumi, "Investigation of mechanical properties of bimetallic square tubes produced by shape rolling of Al/Cu circular pipes,"
Journal of Mechanical Science and Technology, vol. 30, no. 9, pp. 4299-4306, 2016, doi:
http://doi.org/10.1007/s12206-016-0844-8.
[6] A. Tavassolimanesh and A. Alavi Nia, "A new ap proach for manufacturing copper-clad aluminum bimetallic tubes by friction stir welding (FSW),"
Journal of Manufacturing Processes, vol. 30, pp. 374-384, 2017, doi:
https://doi.org/10.1016/j.jmapro.2017.10.010.
[7] Y. Lei
et al., "Dissimilar Cu/Al tube joint by EMF-assisted brazing,"
The International Journal of Advanced Manufacturing Technology, vol. 95, no. 9, pp. 4039-4047, 2018, doi:
http://doi.org/10.1007/s00170-017-1535-z.
[8] J. Salehi, A. Rezaeian, and M. R. Toroghinejad, "Fabrication and characterization of a bimetallic Al/Cu tube using the tube sinking process,"
The International Journal of Advanced Manufacturing Technology, vol. 96, no. 1, pp. 153-159, 2018, doi:
http://doi.org/10.1007/s00170-017-1485-5.
[9] H. Zilin
et al., "Expanding-welding: A hybrid deformation and welding process for joining dissimilar metals,"
Journal of Materials Processing Technology, vol. 303, p. 117535, 2022, doi:
https://doi.org/10.1016/j.jmatprotec.2022.117535.
[10] S. Hosseini, M. Roostaei, M. Mashhadi, H. Jabbari, and G. Faraji, "Fabrication of Al/Mg Bimetallic Thin-Walled Ultrafine-Grained Tube by Severe Plastic Deformation,"
Journal of Materials Engineering and Performance, vol. 31, 01 2022, doi:
http://doi.org/10.1007/s11665-021-06514-5.
[11] E. Kaveh
et al., "Severe plastic deformation for producing superfunctional ultrafine-grained and heterostructured materials: An interdisciplinary review,"
Journal of Alloys and Compounds, vol. 1002, p. 174667, 2024, doi:
https://doi.org/10.1016/j.jallcom.2024.174667.
[12] H. Bohluli, K. Khalili, and S. M. H. Seyedkashi, "An investigation on twist extrusion followed by forward extrusion in production of aluminum–copper bimetallic bar,"
CIRP Journal of Manufacturing Science and Technology, vol. 33, pp. 52-62, 2021, doi:
https://doi.org/10.1016/j.cirpj.2021.02.010.
|
نشریه مهندسی مکانیک دوره 34، شماره 2، شماره پیاپی 161، خرداد و تیر 1404
|
|
زهره ایمانینژاد و حمید بهلولی نشریه مهندسی مکانیک
|
|
نشریه مهندسی مکانیک دوره 34، شماره 2، شماره پیاپی 161، خرداد و تیر 1404
|
[13] A. Ali, M.-E. Soliman, Y. Abdelrhman, and I. Hasab-allah, "Investigation of AL/CU Bimetallic Tube Cladding Process by Severe Plastic Deformation," JES. Journal of Engineering Sciences, vol. 51, no. 1, pp. 1-15, 2023, doi: 10.21608/jesaun.2022.154690.1160.
[14] M. I. Abd El Aal, H. H. El-Fahhar, A. Y. Mohamed, and E. A. Gadallah, "Influence of Parallel Tubular Channel Angular Pressing (PTCAP) Processing on the Microstructure Evolution and Wear Characteristics of Copper and Brass Tubes,"
Materials, vol. 15, no. 9, p. 2985, 2022, doi:
http://doi.org/10.3390/ma15092985.
[15] A. R. Eivani, H. R. Mirzakoochakshirazi, and H. R. Jafarian, "Investigation of joint interface and cracking mechanism of thick cladding of copper on aluminum by equal channel angular pressing (ECAP),"
Journal of Materials Research and Technology, vol. 9, no. 3, pp. 3394-3405, 2020, doi:
https://doi.org/10.1016/j.jmrt.2020.01.075.
[16] A. Khosravifard and R. Ebrahimi, "Investigation of parameters affecting interface strength in Al/Cu clad bimetal rod extrusion process,"
Materials & Design, vol. 31, no. 1, pp. 493-499, 2010, doi:
https://doi.org/10.1016/j.matdes.2009.06.026.
[17] S. Thaneshan, K. Shahin, and H. Z. Saden, "Spiral extrusion of aluminum/copper composite for future manufacturing of hybrid rods: A study of bond strength and interfacial characteristics,"
Journal of Alloys and Compounds, vol. 571, pp. 85-92, 2013, doi:
https://doi.org/10.1016/j.jallcom.2013.03.210.
[18] K. Radim, M. Adéla, K. Lenka, and F. František, "Fabrication and characterization of cold-swaged multilayered Al–Cu clad composites,"
Materials & Design, vol. 71, pp. 36-47, 2015, doi:
https://doi.org/10.1016/j.matdes.2015.01.008.
[19] A. R. Eivani and A. Karimi Taheri, "A new method for producing bimetallic rods,"
Materials Letters, vol. 61, no. 19, pp. 4110-4113, 2007, doi:
https://doi.org/10.1016/j.matlet.2007.01.046.
[20] M. Zebardast and A. K. Taheri, "The cold welding of copper to aluminum using equal channel angular extrusion (ECAE) process,"
Journal of Materials Processing Technology, vol. 211, no. 6, pp. 1034-1043, 2011, doi:
https://doi.org/10.1016/j.jmatprotec.2011.01.004.
[21] M. A. Alaie, M. Kasaeian-Naeini, R. Hashemi, M. Rajabi, and A. Hosseini, "Fabrication of AA1050/CP-Cu Bimetallic Tubes using Parallel Tube-Shaped Channel Angular Pressing Technique and Assessing its Mechanical Properties and Microstructure,"
Transactions of the Indian Institute of Metals, vol. 76, no. 7, pp. 1937-1948, 2023/07/01 2023, doi:
https://doi.org/10.1007/s12666-023-02897-2.
[22] A. Babaei, M. M. Mashhadi, and H. Jafarzadeh, "RETRACTED: Tube Cyclic Extrusion-Compression (TCEC) as a novel severe plastic deformation method for cylindrical tubes,"
Materials Science and Engineering: A, vol. 598, pp. 1-6, 2014, doi:
https://doi.org/10.1016/j.msea.2014.01.025.
[23] A. Afsari, S. E. Eftekhari Shahri, H. Bohluli, and A. Ranaei, "Studying the effect of forming at the dynamic recrystallization threshold temperature on mechanical properties of copper produced by tube cyclic extrusion-compression,"
Tabriz University Mechanical Journal, vol. 53, no. 2, pp. 185-189, 2023, doi:
http://doi.org/10.22034/jmeut.2023.51433.3099.
[24] A. Babaei and M. M. Mashhadi, "Tubular pure copper grain refining by tube cyclic extrusion–compression (TCEC) as a severe plastic deformation technique,"
Progress in Natural Science: Materials International, vol. 24, no. 6, pp. 623-630, 2014, doi:
https://doi.org/10.1016/j.pnsc.2014.10.009.
[25] A. Babaei and M. M. Mashhadi, "RETRACTED: Characterization of ultrafine-grained aluminum tubes processed by Tube Cyclic Extrusion–Compression (TCEC),"
Materials Characterization, vol. 95, pp. 118-128, 2014, doi:
https://doi.org/10.1016/j.matchar.2014.06.013.
[26] A. Babaei and M. M. Mashhadi, "Retraction notice to “Characterization of SPD processed ultrafine-grained pure copper tubes via Tube Cyclic Expansion–Extrusion” [Materials Characterization 101 (2015) 114–121],"
Materials Characterization, vol. 101, p. R1, 2015, doi:
https://doi.org/10.1016/j.matchar.2015.05.037.
[27] A. Ahmadi, B. Mirzakhani, and Y. Payandeh, "Investigation on Macrostructure and Hardness of Cu Tubes Processed by Tubular Cyclic Extrusion-Compression," (in persian),
The Journal of Iranian Metallurgical Engineering Society, vol. 27, no. 1, pp. 62-71, 2024, doi:
http://doi.org/10.22076/me.2023.1999760.1379.
|
زهره ایمانینژاد و حمید بهلولی نشریه مهندسی مکانیک
|
[28] M. Ebrahimi, Q. Wang, and S. Attarilar, "A comprehensive review of magnesium-based alloys and composites processed by cyclic extrusion compression and the related techniques,"
Progress in Materials Science, vol. 131, pp. 101-116, 2023, doi:
https://doi.org/10.1016/j.pmatsci.2022.101016.
]29] E. M. Zayed, M. Shazly, A. E. Sabbagh, and N. A. Mahallawy, "Deformation behavior and properties of severe plastic deformation techniques for bulk materials: A review,"
Heliyon, vol. 9, no. 6, pp. 175-167, 2023, doi:
https://doi.org/10.1016/j.heliyon.2023.e16700.
[30] M. Eftekhari, G. Faraji, M. Bahrami, and M. Baniasadi, "Effects of hydrostatic tube cyclic extrusion compression process on the properties of 5052 aluminum alloy," (in persian),
Iranian Journal of Manufacturing Engineering, vol. 8, no. 8, pp. 38-51, 2021, doi:
http://doi.org/doi:10.1080/10426914.2014.984210.
[31] K. Edalati
et al., "Severe plastic deformation for producing superfunctional ultrafine-grained and heterostructured materials: An interdisciplinary review,"
Journal of Alloys and Compounds, vol. 1002, p. 174667, 10 2024, doi:
http://doi.org/10.1016/j.jallcom.2024.174667.
[32] M. Reihanian, R. Ebrahimi, N. Tsuji, and M. M. Moshksar, "Analysis of the mechanical properties and deformation behavior of nanostructured commercially pure Al processed by equal channel angular pressing (ECAP)," Materials Science and Engineering: A, vol. 473, no. 1, pp. 189-194, 2008/01/25/ 2008, doi: https://doi.org/10.1016/j.msea.2007.04.075.
[33] S. Ghadimi, M. Sedighi, F. Djavanroodi, and A. Asgari, "Experimental and Numerical Investigation of a Cu–Al Bimetallic Tube Produced by ECAP," Materials and Manufacturing Processes, vol. 30, no. 10, pp. 1256-1261, 2015, doi: https://doi.org/10.1080/10426914.2014.984210.
