[1] A. Pegoretti, "Recycling concepts for short-fiber-reinforced and particle-filled thermoplastic composites: A review,"
Advanced Industrial and Engineering Polymer Research, vol. 4, no. 2, pp. 93-104, 2021, doi:
https://doi.org/10.1016/j.aiepr.2021.03.004.
[2] P. Jagadeesh, M. Puttegowda, Y. G. T. Girijappa, S. M. Rangappa, M. K. Gupta, and S. Siengchin, "Mechanical, electrical and thermal behaviour of additively manufactured thermoplastic composites for high performance applications,"
Additive and subtractive manufacturing of composites, pp. 167-199, 2021, doi:
https://doi.org/10.1007/978-981-16-3184-9_7.
[3] M. Das, S. Sahu, and D. Parhi, "Composite materials and their damage detection using AI techniques for aerospace application: A brief review,"
Materials Today: Proceedings, vol. 44, pp. 955-960, 2021, doi:
https://doi.org/10.1016/j.matpr.2020.11.005.
[4] D. Carrasco-Baltasar, S. García-Castillo, I. Ivañez, and C. Navarro, "Modelling of woven CFRP plates subjected to oblique high-velocity impact and membrane loads,"
Composite Structures, vol. 303, p. 116344, 2023, doi:
https://doi.org/10.1016/j.compstruct.2022.116344.
[5] B. Mei and W. Zhu, "Accurate positioning of a drilling and riveting cell for aircraft assembly,"
Robotics and Computer-Integrated Manufacturing, vol. 69, p. 102112, 2021, doi:
https://doi.org/10.1016/j.rcim.2020.102112.
[6] M. Aamir, M. Tolouei-Rad, K. Giasin, and A. Nosrati, "Recent advances in drilling of carbon fiber–reinforced polymers for aerospace applications: A review,"
The International Journal of Advanced Manufacturing Technology, vol. 105, pp. 2289-2308, 2019, doi:
https://doi.org/10.1007/s00170-019-04348-z.
[7] H. Fernandes Medeiros de Queiroz, M. D. Banea, D. Kioshi Kawasaki Cavalcanti, and J. de Souza e Silva Neto, "The effect of multiscale hybridization on the mechanical properties of natural fiber‐reinforced composites,"
Journal of Applied Polymer Science, vol. 138, no. 41, p. 51213, 2021, doi:
https://doi.org/10.1002/app.51213.
[8] L. Calabrese, E. Piperopoulos, and V. Fiore, "Arundo donax fibers as green materials for oil spill recovery,"
Biofibers and biopolymers for biocomposites: Synthesis, characterization and properties, pp. 259-283, 2020, doi:
https://doi.org/10.1007/978-3-030-40301-0_13.
[9] A. A. B. Omran
et al., "Micro-and nanocellulose in polymer composite materials: A review,"
Polymers, vol. 13, no. 2, p. 231, 2021, doi:
https://doi.org/10.3390/polym13020231.
[10] A. Kadier
et al., "Use of industrial wastes as sustainable nutrient sources for bacterial cellulose (BC) production: Mechanism, advances, and future perspectives,"
Polymers, vol. 13, no. 19, p. 3365, 2021, doi:
https://doi.org/10.3390/polym13193365.
[11] Y. Kim and J. Park, "A theory for the free vibration of a laminated composite rectangular plate with holes in aerospace applications,"
Composite Structures, vol. 251, p. 112571, 2020, doi:
https://doi.org/10.1016/j.compstruct.2020.112571.
[12] J. Claramunt, H. Ventura, R. D. Toledo Filho, and M. Ardanuy, "Effect of nanocelluloses on the microstructure and mechanical performance of CAC cementitious matrices,"
Cement and Concrete Research, vol. 119, pp. 64-76, 2019, doi:
https://doi.org/10.1016/j.cemconres.2019.02.006.
[13] U. Khashaba, H. Sallam, A. Al-Shorbagy, and M. Seif, "Effect of washer size and tightening torque on the performance of bolted joints in composite structures,"
Composite Structures, vol. 73, no. 3, pp. 310-317, 2006, doi:
https://doi.org/10.1016/j.compstruct.2005.02.004.
[14] G. D. Babu, K. S. Babu, and B. U. M. Gowd, "Effect of machining parameters on milled natural fiber-reinforced plastic composites,"
J. Adv. Mech. Eng, vol. 1, pp. 1-12, 2013, doi:
https://doi:10.7726/jame.2013.1001.
[15] D. Che, I. Saxena, P. Han, P. Guo, and K. F. Ehmann, "Machining of carbon fiber reinforced plastics/polymers: a literature review,"
Journal of Manufacturing Science and Engineering, vol. 136, no. 3, p. 034001, 2014, doi:
https://doi.org/10.1115/1.4026526.
[16] F. Chegdani and M. El Mansori, "New Multiscale Approach for Machining Analysis of Natural Fiber ReinforcedBio-Composites,"
Journal of Manufacturing Science and Engineering, vol. 141, no. 1, 2018, doi:
https://doi.org/10.1115/1.4041326.
[17] A. Khan, N. Kim, J. K. Shin, H. S. Kim, and B. D. Youn, "Damage assessment of smart composite structures via machine learning: a review,"
JMST Advances, vol. 1, pp. 107-124, 2019, doi:
https://doi.org/10.1007/s42791-019-0012-2.
[18] F. Ahmad, A. Manral, and P. K. Bajpai, "Machining of thermoplastic composites,"
Processing of green composites, pp. 107-123, 2019, doi:
https://doi.org/10.1007/978-981-13-6019-0_8.
[19] K. Malik, F. Ahmad, and E. Gunister, "Drilling performance of natural fiber reinforced polymer composites: a review,"
Journal of Natural Fibers, vol. 19, no. 12, pp. 4761-4779, 2022, doi:
https://doi.org/10.1080/15440478.2020.1870624.
[20] R. Stone and K. Krishnamurthy, "A neural network thrust force controller to minimize delamination during drilling of graphite-epoxy laminates,"
International Journal of Machine Tools and Manufacture, vol. 36, no. 9, pp. 985-1003, 1996, doi:
https://doi.org/10.1016/0890-6955(96)00013-2.
[21] M. Altin Karataş, A. R. Motorcu, and H. Gökkaya, "Study on delamination factor and surface roughness in abrasive water jet drilling of carbon fiber-reinforced polymer composites with different fiber orientation angles,"
Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol. 43, pp. 1-29, 2021, doi:
https://doi.org/10.1007/s40430-020-02741-4.
[22] J. Xu, "Manufacturing of fibrous composites for engineering applications," vol. 6, no. 7, p. 187, 2022, doi:
https://doi.org/10.3390/jcs6070187.
[23] G. Hegedus, T. Sarkadi, and T. Czigany, "Self-sensing composite: reinforcing fiberglass bundle for damage detection,"
Composites Part A: Applied Science and Manufacturing, vol. 131, p. 105804, 2020, doi:
https://doi.org/10.1016/j.compositesa.2020.105804.
[24] K. K. Panchagnula, N. V. K. Jasti, and J. S. Panchagnula, "Prediction of drilling induced delamination and circularity deviation in GFRP nanocomposites using deep neural network,"
Materials Today: Proceedings, vol. 62, pp. 7118-7123, 2022, doi:
https://doi.org/10.1016/j.matpr.2022.02.041.
[25] M. Monoranu, R. L. Mitchell, K. Kerrigan, J. P. A. Fairclough, and H. Ghadbeigi, "The effect of particle reinforcements on chip formation and machining induced damage of modified epoxy carbon fibre reinforced polymers (CFRPs),"
Composites Part A: Applied Science and Manufacturing, vol. 154, p. 106793, 2022, doi:
https://doi.org/10.1016/j.compositesa.2021.106793.
[26] D. Geng
et al., "Delamination formation, evaluation and suppression during drilling of composite laminates: A review,"
Composite Structures, vol. 216, pp. 168-186, 2019, doi:
https://doi.org/10.1016/j.compstruct.2019.02.099.
[27] A. Jain, B. Singh, and Y. Shrivastava, "Reducing the heat-affected zone during the laser beam drilling of basalt-glass hybrid composite,"
Composites Part B: Engineering, vol. 176, p. 107294, 2019, doi:
https://doi.org/10.1016/j.compositesb.2019.107294.
[28] R. Tewari, M. K. Singh, S. Zafar, and S. Powar, "Parametric optimization of laser drilling of microwave-processed kenaf/HDPE composite,"
Polymers and Polymer Composites, vol. 29, no. 3, pp. 176-187, 2021, doi:
https://doi.org/10.1177/0967391120905705.
[29] H. N. Dhakal, S. O. Ismail, S. O. Ojo, M. Paggi, and J. R. Smith, "Abrasive water jet drilling of advanced sustainable bio-fibre-reinforced polymer/hybrid composites: a comprehensive analysis of machining-induced damage responses,"
The International Journal of Advanced Manufacturing Technology, vol. 99, pp. 2833-2847, 2018, doi:
https://doi.org/10.1007/s00170-018-2670-x.
[30] S. Kalirasu, N. Rajini, S. Rajesh, J. W. Jappes, and K. Karuppasamy, "AWJM Performance of jute/polyester composite using MOORA and analytical models,"
Materials and manufacturing processes, vol. 32, no. 15, pp. 1730-1739, 2017, doi:
https://doi.org/10.1080/10426914.2017.1279314.
[31] N. Abilash and M. Sivapragash, "Optimizing the delamination failure in bamboo fiber reinforced polyester composite,"
Journal of King Saud University-Engineering Sciences, vol. 28, no. 1, pp. 92-102, 2016, doi:
https://doi.org/10.1016/j.jksues.2013.09.004.
[32] A. KM and J. MP, "Optimization of process parameters on drilling of natural fibres reinforced in epoxy resin matrices using Taguchi–Grey relational analysis,"
Multidiscipline Modeling in Materials and Structures, vol. 16, no. 5, pp. 937-949, 2020, doi:
https://doi.org/10.1108/mmms-06-2019-0108.
[33] A. Athijayamani, M. Thiruchitrambalam, U. Natarajan, and B. Pazhanivel, "Influence of alkali‐treated fibers on the mechanical properties and machinability of roselle and sisal fiber hybrid polyester composite,"
Polymer composites, vol. 31, no. 4, pp. 723-731, 2010, doi:
https://doi.org/10.1002/pc.20853.
[34] K. Debnath, M. Sisodia, A. Kumar, and I. Singh, "Damage-free hole making in fiber-reinforced composites: an innovative tool design approach,"
Materials and Manufacturing Processes, vol. 31, no. 10, pp. 1400-1408, 2016, doi:
https://doi.org/10.1080/10426914.2016.1140191.
[35] A. Solati, M. Hamedi, and M. Safarabadi, "Combined GA-ANN approach for prediction of HAZ and bearing strength in laser drilling of GFRP composite,"
Optics & Laser Technology, vol. 113, pp. 104-115, 2019, doi:
https://doi.org/10.1016/j.optlastec.2018.12.016.
[36] A. Solati, M. Hamedi, and M. Safarabadi, "Comprehensive investigation of surface quality and mechanical properties in CO 2 laser drilling of GFRP composites,"
The International Journal of Advanced Manufacturing Technology, vol. 102, pp. 791-808, 2019, doi:
https://doi.org/10.1007/s00170-018-3164-6
[37] M. Kadivar, J. Akbari, R. Yousefi, A. Rahi, and M. G. Nick, "Investigating the effects of vibration method on ultrasonic-assisted drilling of Al/SiCp metal matrix composites,"
Robotics and Computer-Integrated Manufacturing, vol. 30, no. 3, pp. 344-350, 2014, doi:
https://doi.org/10.1016/j.rcim.2013.10.001.
[38] P. Mehbudi, V. Baghlani, J. Akbari, A. Bushroa, and N. Mardi, "Applying ultrasonic vibration to decrease drilling-induced delamination in GFRP laminates,"
Procedia Cirp, vol. 6, pp. 577-582, 2013, doi:
https://doi.org/10.1016/j.procir.2013.03.097.
[39] T. Rajmohan, R. Vinayagamoorthy, and K. Mohan, "Review on effect machining parameters on performance of natural fibre–reinforced composites (NFRCs),"
Journal of Thermoplastic Composite Materials, vol. 32, no. 9, pp. 1282-1302, 2019, doi:
https://doi.org/10.1177/0892705718796541.
[40] L. M. P. Durão, J. M. R. Tavares, V. H. C. De Albuquerque, J. F. S. Marques, and O. N. Andrade, "Drilling damage in composite material," Materials, vol. 7, no. 5, pp. 3802-3819, 2014.
[41] A. A. A. Nasir, A. I. Azmi, T. C. Lih, and M. S. A. Majid, "Critical thrust force and critical feed rate in drilling flax fibre composites: A comparative study of various thrust force models,"
Composites Part B: Engineering, vol. 165, pp. 222-232, 2019, doi:
https://doi.org/10.1016/j.compositesb.2018.11.134.
[42] V. Chaudhary and P. P. Gohil, "Investigations on drilling of bidirectional cotton polyester composite,"
Materials and Manufacturing Processes, vol. 31, no. 7, pp. 960-968, 2016, doi:
https://doi.org/10.1080/10426914.2015.1059444.
[43] A. A. Nasir, A. Azmi, and A. Khalil, "Measurement and optimisation of residual tensile strength and delamination damage of drilled flax fibre reinforced composites,"
Measurement, vol. 75, pp. 298-307, 2015, doi:
https://doi.org/10.1080/10426914.2015.1059444.
[44] M. M. Nassar, R. Arunachalam, and K. I. Alzebdeh, "Machinability of natural fiber reinforced composites: a review,"
The International Journal of Advanced Manufacturing Technology, vol. 88, pp. 2985-3004, 2017, doi:
https://doi.org/10.1007/s00170-016-9010-9.
[45] P. Mayuet, A. Gallo, A. Portal, P. Arroyo, M. Alvarez, and M. Marcos, "Damaged area based study of the Break-IN and Break-OUT defects in the dry drilling of carbon fiber reinforced plastics (CFRP),"
Procedia Engineering, vol. 63, pp. 743-751, 2013, doi:
https://doi.org/10.1016/j.proeng.2013.08.249.
[46] M.-B. Lazar and P. Xirouchakis, "Experimental analysis of drilling fiber reinforced composites,"
International Journal of Machine Tools and Manufacture, vol. 51, no. 12, pp. 937-946, 2011, doi:
https://doi.org/10.1016/j.ijmachtools.2011.08.009.
[47] C. Tsao and H. Hocheng, "Effect of tool wear on delamination in drilling composite materials,"
International journal of mechanical sciences, vol. 49, no. 8, pp. 983-988, 2007, doi:
https://doi.org/10.1016/j.ijmecsci.2007.01.001.
[48] A. Lotfi, H. Li, D. V. Dao, and G. Prusty, "Natural fiber–reinforced composites: A review on material, manufacturing, and machinability,"
Journal of Thermoplastic Composite Materials, vol. 34, no. 2, pp. 238-284, 2021, doi:
https://doi.org/10.1177/0892705719844546.
[49] S. Jayabal and U. Natarajan, "Optimization of thrust force, torque, and tool wear in drilling of coir fiber-reinforced composites using Nelder–Mead and genetic algorithm methods,"
The International Journal of Advanced Manufacturing Technology, vol. 51, pp. 371-381, 2010, doi:
https://doi.org/10.1007/s00170-010-2605-7.
[50] D. Liu, Y. Tang, and W. Cong, "A review of mechanical drilling for composite laminates,"
Composite structures, vol. 94, no. 4, pp. 1265-1279, 2012, doi:
https://doi.org/10.1016/j.compstruct.2011.11.024.
[51] A. Caggiano, "Machining of fibre reinforced plastic composite materials,"
Materials, vol. 11, no. 3, p. 442, 2018, doi:
https://doi.org/10.3390/ma11030442.
[52] T. Rajamurugan, K. Shanmugam, and K. Palanikumar, "Analysis of delamination in drilling glass fiber reinforced polyester composites,"
Materials & Design, vol. 45, pp. 80-87, 2013, doi:
https://doi.org/10.1016/j.matdes.2012.08.047.
[53] A. Abrao, P. Faria, J. C. Rubio, P. Reis, and J. P. Davim, "Drilling of fiber reinforced plastics: A review,"
Journal of Materials Processing Technology, vol. 186, no. 1-3, pp. 1-7, 2007, doi:
https://doi.org/10.1016/j.jmatprotec.2006.11.146.
[54] J. C. Rubio, A. Abrao, P. Faria, A. E. Correia, and J. P. Davim, "Effects of high speed in the drilling of glass fibre reinforced plastic: evaluation of the delamination factor,"
International Journal of Machine Tools and Manufacture, vol. 48, no. 6, pp. 715-720, 2008, doi:
https://doi.org/10.1016/j.ijmachtools.2007.10.015.
[55] M. Ganjiani, M. Safarabadi, N. Mehri-Khansari, and H. Oruji, "Effects of delamination in drilling glass/polyester composite,"
Frontiers of Structural and Civil Engineering, vol. 15, no. 2, pp. 552-567, 2021, doi:
https://doi.org/10.1007/s11709-021-0699-7.
[56] T. H. Nam, S. Ogihara, N. H. Tung, and S. Kobayashi, "Effect of alkali treatment on interfacial and mechanical properties of coir fiber reinforced poly (butylene succinate) biodegradable composites,"
Composites Part B: Engineering, vol. 42, no. 6, pp. 1648-1656, 2011, doi:
https://doi.org/10.1016/j.compositesb.2011.04.001.
[57] S. Karnik, V. Gaitonde, J. C. Rubio, A. E. Correia, A. Abrão, and J. P. Davim, "Delamination analysis in high speed drilling of carbon fiber reinforced plastics (CFRP) using artificial neural network model,"
Materials & Design, vol. 29, no. 9, pp. 1768-1776, 2008, doi:
https://doi.org/10.1016/j.matdes.2008.03.014.
[58] M. Safarabadi and M. Sardar, "Numerical study of GFRP joints bearing strength reduction due to drilling-induced delamination,"
Journal of Composite Materials, vol. 54, no. 16, pp. 2185-2194, 2020, doi:
https://doi.org/10.1177/0021998319893075.
[59] T. Lukács, C. Pereszlai, and N. Geier, "Delamination measurement in glass fibre reinforced polymer (GFRP) composite based on image differencing,"
Composites Part B: Engineering, vol. 248, p. 110381, 2023, doi:
https://doi.org/10.1016/j.compositesb.2022.110381.
[60] W.-C. Chen, "Some experimental investigations in the drilling of carbon fiber-reinforced plastic (CFRP) composite laminates,"
International Journal of Machine Tools and Manufacture, vol. 37, no. 8, pp. 1097-1108, 1997, doi:
https://doi.org/10.1016/S0890-6955(96)00095-8.
[61] S. Gaugel
et al., "A comparative study on tool wear and laminate damage in drilling of carbon-fiber reinforced polymers (CFRP),"
Composite Structures, vol. 155, pp. 173-183, 2016, doi:
https://doi.org/10.1016/j.compstruct.2016.08.004.
[62] N. Khanna, F. Pusavec, C. Agrawal, and G. M. Krolczyk, "Measurement and evaluation of hole attributes for drilling CFRP composites using an indigenously developed cryogenic machining facility,"
Measurement, vol. 154, p. 107504, 2020, doi:
https://doi.org/10.1016/j.measurement.2020.107504.
[63] J. P. Davim, J. C. Rubio, and A. Abrao, "A novel approach based on digital image analysis to evaluate the delamination factor after drilling composite laminates,"
Composites Science and Technology, vol. 67, no. 9, pp. 1939-1945, 2007, doi:
https://doi.org/10.1016/j.compscitech.2006.10.009.
[64] C. Tsao, K. Kuo, and I. Hsu, "Evaluation of a novel approach to a delamination factor after drilling composite laminates using a core–saw drill,"
The International Journal of Advanced Manufacturing Technology, vol. 59, pp. 617-622, 2012, doi:
https://doi.org/10.1007/s00170-011-3532-y.
[65] U. Khashaba, "Delamination in drilling GFR-thermoset composites," in
International conference on aerospace sciences and aviation technology, 2003, vol. 10, no. 10th International Conference On Aerospace Sciences & Aviation Technology: The Military Technical College, pp. 461-481, doi:
https://dx.doi.org/10.21608/asat.2013.24453.
[66] L. M. P. Durão
et al., "Drilling delamination outcomes on glass and sisal reinforced plastics," in
Materials Science Forum, 2013, vol. 730: Trans Tech Publ, pp. 301-306, doi:
https://doi.org/10.4028/www.scientific.net/MSF.730-732.301.
[67] T. B. Yallew, P. Kumar, and I. Singh, "A study about hole making in woven jute fabric-reinforced polymer composites,"
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, vol. 230, no. 4, pp. 888-898, 2016, doi:
https://doi.org/10.1177/1464420715587750.
[68] N. Geier, D. I. Poór, C. Pereszlai, J. Bacs, and B. Z. Balázs, "Fúrásindukált delamináció kialakulása és mérőszámai szálerősített polimer (FRP) kompozitokban= Formation and Measures of Drilling Induced Delamination in Fibre Reinforced Polymer (FRP) Composites,"
Gradus, vol. 8, no. 1, pp. 254-260, 2021, doi:
https://doi.org/10.47833/2021.1.ENG.005.
[69] H. Rezghi Maleki, M. Hamedi, M. Kubouchi, and Y. Arao, "Experimental study on drilling of jute fiber reinforced polymer composites,"
Journal of Composite Materials, vol. 53, no. 3, pp. 283-295, 2019, doi:
https://doi.org/10.1177/0021998318782376.
[70] H. R. Maleki, B. Abazadeh, Y. Arao, and M. Kubouchi, "Selection of an appropriate non-destructive testing method for evaluating drilling-induced delamination in natural fiber composites,"
NDT & E International, vol. 126, p. 102567, 2022, doi:
https://doi.org/10.1016/j.ndteint.2021.102567.
[71] H. Rezghi Maleki, M. Hamedi, M. Kubouchi, and Y. Arao, "Experimental investigation on drilling of natural flax fiber-reinforced composites,"
Materials and Manufacturing Processes, vol. 34, no. 3, pp. 283-292, 2019, doi:
https://doi.org/10.1080/10426914.2018.1532584.
[72] M. Jenarthanan and R. Jeyapaul, "Machinability study of carbon fibre reinforced polymer (CFRP) composites using design of experiment technique,"
Pigment & Resin Technology, vol. 43, no. 1, pp. 35-44, 2014, doi:
https://doi/10.1108/PRT-12-2012-0088.
[73] G. Kumar, S. M. Rangappa, S. Siengchin, and S. Zafar, "A review of recent advancements in drilling of fiber-reinforced polymer composites,"
Composites Part C: Open Access, vol. 9, p. 100312, 2022, doi:
https://doi.org/10.1016/j.jcomc.2022.100312.
[74] A. Singh and A. K. Sharma, "On microwave drilling of metal-based materials at 2.45 GHz,"
Applied Physics A, vol. 126, no. 10, p. 822, 2020, doi:
https://doi.org/10.1007/s00339-020-03994-5.
[75] R. Zitoune, V. Krishnaraj, and F. Collombet, "Study of drilling of composite material and aluminium stack,"
Composite structures, vol. 92, no. 5, pp. 1246-1255, 2010, doi:
https://doi.org/10.1016/j.compstruct.2009.10.010.
[76] R. Furness, C. Wu, and A. G. Ulsoy, "Statistical analysis of the effects of feed, speed, and wear on hole quality in drilling," 1996, doi:
https://doi.org/10.1115/1.2831038.
[77] B. Adda, A. Belaadi, M. Boumaaza, and M. Bourchak, "Experimental investigation and optimization of delamination factors in the drilling of jute fiber–reinforced polymer biocomposites with multiple estimators,"
The International Journal of Advanced Manufacturing Technology, vol. 116, pp. 2885-2907, 2021, doi:
https://doi.org/10.1007/s00170-021-07628-9.
[78] K. Palanikumar, B. Latha, V. Senthilkumar, and J. P. Davim, "Analysis on drilling of glass fiber–reinforced polymer (GFRP) composites using grey relational analysis,"
Materials and manufacturing Processes, vol. 27, no. 3, pp. 297-305, 2012, doi:
https://doi.org/10.1080/10426914.2011.577865.
[79] I. Cavusoglu, M. Durakbasa, and M. Cakir, "The effects of drilling operation on the surface roughness of modified GFRP composites," 2018, doi:
https://10.12693/APhysPolA.134.339.
[80] K. Palanikumar, L. Karunamoorthy, and R. Karthikeyan, "Assessment of factors influencing surface roughness on the machining of glass fiber-reinforced polymer composites,"
Materials & design, vol. 27, no. 10, pp. 862-871, 2006, doi:
https://doi.org/10.1016/j.matdes.2005.03.011.
[81] S. Margabandu and S. Subramaniam, "An experimental investigation of thrust force, delamination and surface roughness in drilling of jute/carbon hybrid composites,"
World Journal of Engineering, vol. 17, no. 5, pp. 661-674, 2020, doi:
https://doi/10.1108/WJE-03-2020-0080.
[82] R. Vinayagamoorthy, I. Manoj, G. Narendra Kumar, I. Sai Chand, G. Sai Charan Kumar, and K. Suneel Kumar, "A central composite design based fuzzy logic for optimization of drilling parameters on natural fiber reinforced composite,"
Journal of Mechanical Science and Technology, vol. 32, pp. 2011-2020, 2018, doi:
https://doi.org/10.1007/s12206-018-0409-0.
[83] P. K. Bajpai and I. Singh, "Drilling behavior of sisal fiber-reinforced polypropylene composite laminates,"
Journal of Reinforced Plastics and Composites, vol. 32, no. 20, pp. 1569-1576, 2013, doi:
https://doi.org/10.1177/0731684413492866.
[84] R. John, R. Lin, K. Jayaraman, and D. Bhattacharyya, "Effects of machining parameters on surface quality of composites reinforced with natural fibers,"
Materials and Manufacturing Processes, vol. 36, no. 1, pp. 73-83, 2021, doi:
https://doi.org/10.1080/10426914.2020.1813896.
[85] Y. H. Çelik, E. Kilickap, and A. İ. Kilickap, "An experimental study on milling of natural fiber (jute)-reinforced polymer composites,"
Journal of Composite Materials, vol. 53, no. 22, pp. 3127-3137, 2019, doi:
https://doi.org/10.1177/0021998319826373.
