[1] R. Das, A. Chanda, J. Brechou, and A. Banerjee, "Impact behaviour of fibre–metal laminates," in Dynamic deformation, damage and fracture in composite materials and structures: Elsevier, 2016, pp. 491-542, DOI: https://doi.org/10.1016/B978-0-08-100080-9.00017-8.
[2] L. B. Vogelesang and A. Vlot, "Development of fibre metal laminates for advanced aerospace structures," Journal of materials processing technology, vol. 103, no. 1, pp. 1-5, 2000, DOI: https://doi.org/10.1016/S0924-0136(00)00411-8.
[3] K. Dragan et al., "Damage Detection and Size Quantification of FML with the Use of NDE," Fatigue of Aircraft Structures, vol. 2012, no. 4, pp. 5-9, 2012, DOI: https://doi.org/10.2478/v10164-012-0051-8.
[4] J. Bieniaś, "Fibre metal laminates-some aspects of manufacturing process, structure and selected properties," Composites, vol. 11, no. 1, pp. 39-43, 2011.
[5] F. A. Alshamma and M. M. Kadhim, "Optimization of delamination resistance of vacuum infused glass laminate aluminum reinforced epoxy (GLARE) using various surface preparation techniques," Periodicals of Engineering and Natural Sciences, vol. 10, no. 1,pp.361-375, 2022, DOI: http://dx.doi.org/10.21533/pen.v10i1.2621.
[6] T. Sinmazçelik, E. Avcu, M. Ö. Bora, and O. Çoban, "A review: Fibre metal laminates, background, bonding types and applied test methods," Materials & Design, vol. 32, no. 7, pp. 3671-3685, 2011, DOI: https://doi.org/10.1016/j.matdes.2011.03.011.
[7] P. Sondankar and R. Arakerimath, "Stress and Failure Analysis of Aircraft Wing Using Glare Composite and Aluminum 7075," in ICRRM 2019–System Reliability, Quality Control, Safety, Maintenance and Management: Applications to Civil, Mechanical and Chemical Engineering, 2020: Springer, pp. 33-39, DOI: https://doi.org/10.1007/978-981-13-8507-0_6.
[8] S.-E. Lee, D.-U. Kim, Y.-J. Cho, and H.-S. Seo, "Multiple impact damage in GLARE laminates: Experiments and simulations," Materials, vol. 14, no. 24, p. 7800, 2021, DOI: https://doi.org/10.3390/ma14247800.
[9] J. W. Wong, C. L. Tan, M. Azaman, A. Azmi, and I. W. M. Ming, "Low Velocity Impact Behaviour Analysis of Different Fibre Stacking Sequences of Glass Fibre Reinforcement Composite," in Journal of Physics: Conference Series, 2021, vol. 2051, no. 1: IOP Publishing, p. 012014, DOI: https://iopscience.iop.org/article/10.1088/1742-6596/2051/1/012014/meta.
[10] S. N. A. Safri, M. T. H. Sultan, M. Jawaid, and K. Jayakrishna, "Impact behaviour of hybrid composites for structural applications: A review," Composites Part B: Engineering, vol. 133, pp. 112-121, 2018, DOI: https://doi.org/10.1016/j.compositesb.2017.09.008.
[11] S. Heimbs, "Energy absorption in aircraft structures," in International workshop on hydraulic equipment and support systems for mining, 2012: Trans Tech Publ. Ltd. Zurich, Switzerland, pp. 1-10. DOI: http://www.heimbs online.de/Heimbs_2012_IWHEM.pdf.
[12] M. Richardson and M. Wisheart, "Review of low-velocity impact properties of composite materials," Composites Part A: Applied Science and Manufacturing, vol. 27, no. 12, pp. 1123-1131,1996, DOI: https://doi.org/10.1016/1359835X(96)00074-7.
[13] J. Carrillo and W. Cantwell, "Mechanical properties of a novel fiber–metal laminate based on a polypropylene composite," Mechanics of materials, vol. 41, no. 7, pp. 828-838,2009, DOI: https://doi.org/10.1016/j.mechmat.2009.03.002.
[14] L. Li, L. Sun, T. Wang, N. Kang, and W. Cao, "Repeated low-velocity impact response and damage mechanism of glass fiber aluminium laminates," Aerospace Science and Technology, vol. 84, pp. 995-1010, 2019, DOI: https://doi.org/10.1016/j.ast.2018.11.038.
[15] K. Beklemysheva and I. Petrov, "Numerical modeling of low-velocity impact on hybrid composite," Matematicheskoe modelirovanie, vol. 30, no. 11, pp. 27-43, 2018, DOI: https://ras.jes.su/mmod/s207987840001158-2-1-en.
[16] H. Kumar M and N. R. Mathivanan, "Experimental investigation of Glass Laminate Aluminium Reinforced Epoxy characteristics influences through low velocity impact test," Advances in Materials and Processing Technologies, vol. 9, no. 2, pp. 689-701, 2023, DOI: https://doi.org/10.1080/2374068X.2022.2096829.
[17] S. Hoseinlaghab, M. Farahani, and M. Safarabadi, "Improving the impact resistance of the multilayer composites using nanoparticles," Mechanics Based Design of Structures and Machines, vol. 51, no. 6, pp. 3083-3099, 2023, DOI: https://doi.org/10.1080/15397734.2021.1917424.
[18] S. Hoseinlaghab, M. Farahani, M. Safarabadi, and S. Jalali, "Comparison and identification of efficient nanoparticles to improve the impact resistance of glass/epoxy laminates: experimental and numerical approaches," Mechanics of Advanced Materials and Structures, vol. 30, no. 4, pp. 694-709, 2023, https://doi.org/10.1080/15376494.2021.2023914.
[19] A. Sharei, M. Safarabadi, M. M. Mashhadi, R. S. Solut, and M. Haghighi-Yazdi, "Experimental and numerical investigation of low velocity impact on hybrid short-fiber reinforced foam core sandwich panel," Journal of Composite Materials, vol. 55, no. 29, pp. 4375-4385,2021, DOI: https://doi.org/10.1177/0021998321103738.
[20] A. Fahr, C. Chapman, D. Forsyth, C. Poon, and J. Laliberté, "Nondestructive evaluation methods for damage assessment in fiber‐metal laminates," Polymer composites, vol. 21, no. 4, pp.568-575,2000, DOI: https://doi.org/10.1002/pc.10212.
[21] P. Straznicky, J. Laliberté, C. Poon, and A. Fahr, "Applications of fiber‐metal laminates," Polymer Composites, vol. 21, no. 4, pp. 558-567, 2000, DOI: https://doi.org/10.1002/pc.10211.
[22] A. Vlot, "Impact loading on fibre metal laminates," International Journal of Impact Engineering, vol. 18, no. 3, pp. 291-307, 1996, DOI: https://doi.org/10.1016/0734-743X(96)89050-6.
[23] A. Vlot, E. Kroon, and G. La Rocca, "Impact response of fiber metal laminates," Key Engineering Materials, vol. 141, pp. 235-276, 1997, DOI: https://doi.org/10.4028/www.scientific.net/KEM.141-143.235.
[24] G. Wu and J.-M. Yang, "Impact behavior of GLARE laminates," in Proceedings of the 36th International SAMPE Technical Conference, 2004: SAMPE Covina, CA, DOI: https://doi.org/10,1007/s11837-005-0067-4.
[25] S. Kakati and D. Chakraborty, "Delamination in GLARE laminates subjected to oblique low velocity impact considering friction," European Journal of Mechanics-A/Solids, vol. 97, p. 104817, 2023, DOI: https://doi.org/10.1016/j.euromechsol.2022.104817.
[26] A. P. Sharma, S. H. Khan, R. Kitey, and V. Parameswaran, "Effect of through thickness metal layer distribution on the low velocity impact response of fiber metal laminates," Polymer Testing, vol. 65, pp. 301-312, 2018, DOI: https://link.springer.com/article/10.1007/s10853-006-0014-y.
[27] J. Bienias, P. Jakubczak, and K. Dadej, "Low-velocity impact resistance of aluminium glass laminates–experimental and numerical investigation," Composite structures, vol. 152, pp.339-348,2016, DOI: https://doi.org/10.1016/j.compstruct.2016.05.056.
[28] A. Seyed Yaghoubi, Y. Liu, and B. Liaw, "Low-velocity impact on GLARE 5 fiber-metal laminates: influences of specimen thickness and impactor mass," Journal of Aerospace Engineering, vol. 25, no. 3, pp. 409-420,2012, DOI: https://doi.org/10.1061/(ASCE)AS.1943-5525.0000134.
[29] M. Abbasinasab and M. Mirzaei, "Effect of Impactor Energy and Layers Thickness on Fiber Metal Laminates in Low Velocity Impact," Journal of Aeronautical Engineering, vol. 16, no. 2, pp. 73-82, 2014, DOI: https://doi.org/20.1001.1.17359449.1393.16.2.6.8.
[30] K. Wang and F. Taheri, "Comparison of the Low-Velocity Impact Responses and Compressive Residual Strengths of GLARE and a 3DFML," Polymers, vol. 15, no. 7, p. 1723,2023, DOI: https://doi.org/10.3390/polym15071723.
[31] D.-W. Lee, B.-J. Park, S.-Y. Park, C.-H. Choi, and J.-I. Song, "Fabrication of high-stiffness fiber-metal laminates and study of their behavior under low-velocity impact loadings," Composite Structures, vol. 189, pp. 61-69, 2018, DOI: https://doi.org/10.1016/j.compstruct.2018.01.044.
[32] D. De Cicco, Z. Asaee, and F. Taheri, "Low-velocity impact damage response of fiberglass/magnesium fiber-metal laminates under different size and shape impactors," Mechanics of Advanced Materials and Structures, vol. 24, no. 7, pp. 545-555, 2017, DOI: https://doi.org/10.1080/15376494.2016.1162343.
[33] A. P. Sharma and R. Velmurugan, "Damage and energy absorption characteristics of glass fiber reinforced titanium laminates to low-velocity impact," Mechanics of Advanced Materials and Structures, vol. 29, no. 27, pp. 6242-6265, 2022, DOI: https://doi.org/10.1080/15376494.2021.1974618.
[34] Y. Liu and B. Liaw, "Effects of constituents and lay-up configuration on drop-weight tests of fiber-metal laminates," Applied Composite Materials, vol. 17, pp. 43-62, 2010, DOI: https://doi.org/101007/s10443-009-9119-1.
[35] Y. Chen, L. Chen, Q. Huang, and Z. Zhang, "Effect of metal type on the energy absorption of fiber metal laminates under low-velocity impact," Mechanics of Advanced Materials and Structures, vol. 29, no. 25, pp. 4582-4598, 2022, DOI: https://doi.org/10.1080/15376494.2021.1933659.
[36] A. Sharma and V. Ramachandran, "Low-velocity impact perforation response of titanium/composite laminates: analytical and experimental investigation," Mechanics Based Design of Structures and Machines, vol. 51, no. 9, pp. 5179-5212, 2023, DOI: https://doi.org/10.1080/15397734.2021.1992778.
[37] S. Kakati and D. Chakraborty, "Low velocity impact on fibre metal laminates: A review," Journal of Composite Materials, vol. 57, no. 30, pp. 4731-4750, 2023, DOI: https://doi.org/10.1177/00219983231212544.
[38] R. Wanhill, "GLARE®: A versatile fibre metal laminate (FML) concept," Aerospace Materials and Material Technologies: Volume 1: Aerospace Materials, pp. 291-307, 2017, DOI: https://link.springer.com/chapter/10.1007/978-981-10-2134-3_13.
[39] A. Seyed Yaghoubi, Y. Liu, and B. Liaw, "Stacking sequence and geometrical effects on low-velocity impact behaviors of GLARE 5 (3/2) fiber–metal laminates," Journal of thermoplastic composite materials, vol. 25, no. 2, pp. 223-247, 2012, DOI: https://doi.org/10.1177/0892705711408165.
[40] J. F. Laliberté, P. V. Straznicky, and C. Poon, "Impact damage in fiber metal laminates, part 1: experiment," AIAA Journal, vol. 43, no. 11, pp. 2445-2453, 2005, DOI: https://doi.org/10.2514/1.15159.
[41] G. Wu, J.-M. Yang, and H. T. Hahn, "The impact properties and damage tolerance and of bi-directionally reinforced fiber metal laminates," Journal of materials science, vol. 42, pp. 948-957, 2007, DOI: https://link.springer.com/article/10.1007/s10853-006-0014-y.
[42] S. Kakati and D. Chakraborty, "Influence of impactor mass on the low energy impact response of thin GLARE plates," Mechanics of Advanced Materials and Structures, pp. 1-15, 2022, DOI: https://doi.org/10.1080/15376494.2023.2280725.
[43] L. Yao, C. Wang, W. He, S. Lu, and D. Xie, "Influence of impactor shape on low-velocity impact behavior of fiber metal laminates combined numerical and experimental approaches," Thin-Walled Structures, vol. 145, p. 106399, 2019, DOI: https://doi.org/10.1016/j.tws.2019.106399.
[44] P. You, H. Chen, M. Li, and Y. Wu, "A simulative study on the effect of friction coefficient and angle on failure behaviors of GLARE subjected to low-velocity impact," Science and Engineering of Composite Materials, vol. 30, no. 1, p. 20220194, 2023, DOI: https://doi.org/10.1515/secm-2022-0194.
[45] A. Vlot and J. W. Gunnink, Fibre metal laminates: an introduction, Springer Science & Business Media, 2011, DOI: https://doi.org/10.1007/978-94-010-0995-9.
[46] M. Sadighi, T. Pärnänen, R. Alderliesten, M. Sayeaftabi, and R. Benedictus, "Experimental and numerical investigation of metal type and thickness effects on the impact resistance of fiber metal laminates," Applied Composite Materials, vol. 19, pp. 545-559, 2012, DOI: https://link.springer.com/article/10.1007/s10443-011-9235-6.
[47] G. Bikakis, A. Savaidis, P. Zalimidis, and S. Tsitos, "Influence of the Metal Volume Fraction on the maximum deflection and impact load of GLARE plates subjected to low velocity impact," in IOP Conference Series: Materials Science and Engineering, 2016, vol. 161, no. 1: IOP Publishing, p. 012054, DOI: https://iopscience.iop.org/article/10.1088/1757-899X/161/1/012054/meta.
[48] A. Vlot and M. Krull, "Impact damage resistance of various fibre metal laminates," Le Journal de Physique IV, vol. 7, no. C3, pp. C3-1045-C3-1050, 1997, DOI: https://doi.org/10.1051/jp4:19973176.
[49] G. S. Bikakis, E. Karaiskos, and E. P. Sideridis, "Low-velocity impact response of fiber-metal laminates consisting of different standard GLARE grades," Journal of Reinforced Plastics and Composites, vol. 35, no. 13, pp. 1029-1040, 2016, DOI: https://doi.org/10.1177/0731684416633770.
[50] T. Polocoşer, B. Kasal, F. Stöckel, and X. Li, "Dynamic material properties of wood subjected to low-velocity impact," Materials and Structures, vol. 51, pp. 1-16, 2018, DOI: https://doi.org/10.1617/s11527-018-1186-z.
[51] Z. Khan, M. Naik, F. Al-Sulaiman, and N. Merah, "Low velocity impact of filament-wound glass-fiber reinforced composite pipes," J Material Sci Eng, vol. 5, no. 253, pp. 2169-0022.10002, 2016, DOI: https://pdfs.semanticscholar.org/8c48/0a0aa0a97dd1ef2054a3476df05c26b122ae.pdf.
[52] O. A. Mocian, D. M. Constantinescu, M. Sandu, and Ş. Sorohan, "Low velocity impact of 6082-T6 aluminum plates," in AIP Conference Proceedings, 2018, vol. 1932, no. 1:AIP Publishing, DOI: https://doi.org/10.1063/1.5024175.
[53] S. Syed Abdullah, "Low velocity impact testing and post-impact analysis through compression after impact (CAI) and C-scan," in Impact studies of composite materials: Springer, 2021, pp. 185-194, DOI: https://doi.org/10.1007/978-981-16-1323-4_12.
[54] M. M. Idan, "Low Velocity Impact Response of Laminated Composite Cylinder," in 2019 2nd International Conference on Engineering Technology and its Applications (IICETA), 2019: IEEE, pp. 191-195, DOI: 10.1109/IICETA47481.2019.9012986.
[55] H. Shetty, D. Sethuram, B. Rammohan, and P. Budarapu, "Low-velocity impact studies on GFRP and hybrid composite structures," International Journal of Advances in Engineering Sciences and Applied Mathematics, vol. 12, pp. 125-141, 2020, DOI: https://doi.org/10.1007/s12572-021-00287-9.
[56] R. K. Dundi, P. N. Amin, and N. R. Mathivanan, "Analysis of factors influencing absorbed energy in CFRP and Kevlar hybrid laminate subjected to low-velocity impact," Australian Journal of Multi-Disciplinary Engineering, vol. 19, no. 1, pp. 1-9, 2023, DOI: https://doi.org/10.1080/14488388.2023.2187953.
[57] A. Bhasin, S. Raju Keshavanarayana, T. Maichan, H. Ramdial, L. M. Gomez, and G. Olivares, "Low Velocity Impact on Composite Energy Absorbers: Experimental Analysis," in AIAA SCITECH 2023 Forum, 2023, p. 1262, DOI: https://doi.org/10.2514/6.2023-1262.
[58] H. Sun, F. Li, K. Shen, and K. Li, "Energy Absorption of carbon-fiber-reinforced composite laminates under low-velocity impacts," Mechanics of Composite Materials, vol. 56, pp. 389-396, 2020, DOI: https://doi.org/10.1007/s11029-020-09890-6.
[59] K. Amirashjaee-Asalemi, F. Taheri-Behrooz, and S. Fakhreddini-Najafabadi, "Investigation of the Low-Velocity Impact and Compression after Impact Performance of CFRPs," Journal of Engineering Mechanics, vol. 149, no. 9, p. 04023066,2023, DOI: https://doi.org/10.1061/JENMDT.EMENG-6932.
[60] Y. Huang et al., "Research on low-velocity impact response of novel short-fiber-reinforced composite laminates," Polymers, vol. 15, no. 4, p. 840, 2023, DOI: https://doi.org/10.3390/polym15040840.
[61] S. Hoseinlaghab, M. Farahani, M. Safarabadi, and M. Nikkhah, "Tension-after-impact analysis and damage mechanism evaluation in laminated composites using AE monitoring," Mechanical Systems and Signal Processing, vol. 186, p. 109844, 2023,DOI: https://doi.org/10.1016/j.ymssp.2022.109844.
[62] L. Lokesh Kumar, B. Raviteja, S. Ashish, A. Arun, A. Anilchandra, and C. Manjunatha, "Simulation Studies of Low-Velocity Impact Damage in FRPS," in International Conference on Vibration Engineering and Technology of Machinery, 2021: Springer, pp. 219-236, DOI: https://doi.org/10.1007/978-981-99-4721-8_15.
