[1] L. ‐P. Lefebvre, J. Banhart, and D. C. Dunand, “Porous Metals and Metallic Foams: Current Status and Recent Developments,” Adv Eng Mater, vol. 10, no. 9, pp. 775–787, Sep. 2008, doi: 10.1002/adem.200800241.
[2] A. Hassan and I. A. Alnaser, “A Review of Different Manufacturing Methods of Metallic Foams,” ACS Omega, vol. 9, no. 6, pp. 6280–6295, Feb. 2024, doi: 10.1021/acsomega.3c08613.
[3] S.-O. Agbedor et al., “Recent progress in porous Mg-based foam preparation approaches: effect of processing parameters on structure and mechanical property,” Journal of Iron and Steel Research International, vol. 29, no. 3, pp. 371–402, Mar. 2022, doi: 10.1007/s42243-021-00671-6.
[4] H. Kapłon, C. Blawert, J. Chęcmanowski, and K. Naplocha, “Development of open-porosity magnesium foam produced by investment casting,” Journal of Magnesium and Alloys, vol. 10, no. 7, pp. 1941–1956, Jul. 2022, doi: 10.1016/j.jma.2022.01.003.
[5] M. Akbari, P. Asadi, R. A. Behnagh, F. Bedir, N. Choupani, and T. Sadowski, “Process Parameters and Tool Design in Friction Stir Extrusion: A Sustainable Recycling Technique,” Engineering Reports, vol. 7, no. 1, Jan. 2025, doi: 10.1002/eng2.13060.
[6] M. Adnan, “Recycling magnesium alloy AZ31B chips via friction stir consolidation: A sustainable approach,” 2025, pp. 2546–2555. doi: 10.21741/9781644903599-275.
[7] D. Catalini, D. Kaoumi, A. P. Reynolds, and G. J. Grant, “Dispersoid Distribution and Microstructure in Fe-Cr-Al Ferritic Oxide Dispersion-Strengthened Alloy Prepared by Friction Consolidation,” Metallurgical and Materials Transactions A, vol. 46, no. 10, pp. 4730–4739, Oct. 2015, doi: 10.1007/s11661-015-3059-1.
[8] S. Whalen, S. Jana, D. Catalini, N. Overman, and J. Sharp, “Friction Consolidation Processing of n-Type Bismuth-Telluride Thermoelectric Material,” J. Electron Mater, vol. 45, no. 7, pp. 3390–3399, Jul. 2016, doi: 10.1007/s11664-016-4454-0.
[9] M. Narvan, R. Abdi Behnagh, N. Shen, M. K. Besharati Givi, and H. Ding, “Shear compaction processing of SiC nanoparticles reinforced magnesium composites directly from magnesium chips,” J. Manuf Process, vol. 22, pp. 39–48, Apr. 2016, doi: 10.1016/j.jmapro.2016.01.010.
[10] P. M. K. H. A. Reza Abdi Behnagh, “Recycling of Magnesium Machining Chips via Shear Consolidation Processing,” International Journal of Advanced Design and Manufacturing Technology, vol. 12, no. 1, pp. 95–99, 2019.
[11] P. Asadi, M. Akbari, A. Armani, M. R. M. Aliha, M. Peyghami, and T. Sadowski, “Recycling of brass chips by sustainable friction stir extrusion,” J. Clean Prod, vol. 418, p. 138132, Sep. 2023, doi: 10.1016/j.jclepro.2023.138132.
[12] R. A. Behnagh, H. Abdollahi, M. A. M. Pour, and B. Shahbazi, “Microstructure, mechanical properties, and electrical conductivity of the solid-state recycled pure copper machining chips,” Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, vol. 235, no. 1, pp. 195–201, Jan. 2021, doi: 10.1177/1464420720957366.
[13] S. Lei, H. Xu, B. Jiang, Y. Wang, M. Hu, and Z. Ji, “Effect of Extrusion Temperature on Microstructure and Mechanical Properties of Mg–Al–Zn Alloy Prepared by Solid‐State Recycling of Mixed Waste Chips,” Adv Eng Mater, vol. 26, no. 16, Aug. 2024, doi: 10.1002/adem.202401172.
[14] H. Lai, Y. Zhang, C. Wang, J. Hu, F. Yu, and D. Zhang, “Achieving an excellent combination of tensile properties of recycled H13 steel prepared by thermomechanical consolidations of chips,” Materials Science and Engineering: A, vol. 926, p. 147964, Mar. 2025, doi: 10.1016/j.msea.2025.147964.
[15] A. Latif, G. Ingarao, M. Gucciardi, and L. Fratini, “A novel approach to enhance mechanical properties during recycling of aluminum alloy scrap through friction stir consolidation,” The International Journal of Advanced Manufacturing Technology, vol. 119, no. 3–4, pp. 1989–2005, Mar. 2022, doi: 10.1007/s00170-021-08346-y.
[16] S. S. Salins, S. Kumar, S. Shetty, H. K. Sachidananda, and M. S. A. Khan, “Characterization of the Aluminium-Based Metal Foam Properties for Automotive Applications,” Arab J. Sci Eng, vol. 50, no. 12, pp. 9247–9260, Jun. 2025, doi: 10.1007/s13369-024-09399-3.
