[1] A. Sousanabadi Farahani, M. Taheri, and M. J. Mohammadi, "Investigating the effectiveness of polymethyl methacrylate drilling parameters using coated tools," Mechanic of Advanced and Smart Materials, pp. -, 2025, doi:
https://doi.org/10.61186/masm.2025.2042384.1136.
[2] G. Taheri, R. Saeidi Abueshaghi, F. Setoudeh, V. Tahmasbi, and M. Mohammadian, "Analysis and optimization of cortical bone drilling process based on stochastic optimization,"
Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, p. 09544119251321134, 2025, doi:
https://doi.org/10.1177/09544119251321134.
[3] M. Ghoreishi, V. Tahmasbi, and H. Heydari, "Investigation, sensitivity analysis and multi objective optimization of effective parameters on temperature in robotic drilling bone,"
Modares Mechanical Engineering, vol. 18, no. 5, pp. 142-153, 2018, doi:
https://doi.org/10.1177/09544119251321134.
[4] G. Singh, V. Jain, and D. Gupta, "Multi-objective performance investigation of orthopaedic bone drilling using Taguchi membership function,"
Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, vol. 231, no. 12, pp. 1133-1139, 2017, doi:
https://doi.org/10.1177/0954411917735129.
[5] D. C. Kim, D. M. Kim, and H. W. Park, "An analysis of bone drilling process using finite element analysis,"
Journal of Mechanical Science and Technology, vol. 38, no. 6, pp. 3237-3245, 2024, doi:
https://doi.org/10.1007/s12206-024-0541-y.
[7] B. Zhang, G. Chen, Y. Lv, H. Li, and H. Wei, "Methods of bone drilling in surgery: current situation and prospects,"
The International Journal of Advanced Manufacturing Technology, pp. 1-23, 2025, doi:
https://doi.org/10.1007/s00170-025-15177-8.
[8] M. T. Hillery and I. Shuaib, "Temperature effects in the drilling of human and bovine bone,"
Journal of Materials Processing Technology, vol. 92, pp. 302-308, 1999, doi:
https://doi.org/10.1016/S0924-0136(99)00155-7.
[9] K. Alam, A. Mitrofanov, and V. V. Silberschmidt, "Experimental investigations of forces and torque in conventional and ultrasonically-assisted drilling of cortical bone,"
Medical engineering & physics, vol. 33, no. 2, pp. 234-239, 2011, doi:
https://doi.org/10.1016/j.medengphy.2010.10.003.
[10] G. Augustin, S. Davila, K. Mihoci, T. Udiljak, D. S. Vedrina, and A. Antabak, "Thermal osteonecrosis and bone drilling parameters revisited,"
Archives of orthopaedic and trauma surgery, vol. 128, pp. 71-77, 2008, doi:
https://doi.org/10.1007/s00402-007-0427-3.
[11] G. Augustin, S. Davila, T. Udiljak, D. S. Vedrina, and D. Bagatin, "Determination of spatial distribution of increase in bone temperature during drilling by infrared thermography: preliminary report,"
Archives of Orthopaedic and Trauma Surgery, vol. 129, pp. 703-709, 2009, doi:
https://doi.org/10.1007/s00402-008-0630-x.
[12] J. Zhao, Z. Zhang, X. Wu, Z. Zhang, Z. Li, and S. Liu, "Optimizing bone screw insertion: The impact of pre-drilling diameter, bone quality, and spindle speed on mechanical stability and thermal dynamics in synthetic models,"
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, p. 09544062251318099, 2025, doi:
https://doi.org/10.1177/09544062251318099.
[13] M. Khoran and H. Amirabadi, "Simulation and Finite Element Modeling Study of Bone Drilling,"
Journal of Mechanical Engineering, vol. 30, no. 6, pp. 3-10, 2022, doi:
https://doi.org/10.30506/mmep.2022.538547.1949.
[14] R. P. Singh, P. M. Pandey, M. A. Mir, and A. R. Mridha, "Thermal changes during drilling in human femur by rotary ultrasonic bone drilling machine: A histologic and ultrastructural study,"
Journal of Biomedical Materials Research Part B: Applied Biomaterials, vol. 110, no. 5, pp. 1023-1033, 2022, doi:
https://doi.org/10.1002/jbm.b.34975.
[15] N. Mondal
et al., "Optimization of high speed bone drilling with automated osteonecrosis avoidance using an ANN-GA hybrid method,"
International Journal of Modelling and Simulation, pp. 1-22, 2024, doi:
https://doi.org/10.1080/02286203.2024.2437827.
[16] O. Salomó-Coll, B. Auriol-Muerza, N. Lozano-Carrascal, F. Hernández-Alfaro, H.-L. Wang, and J. Gargallo-Albiol, "Influence of bone density, drill diameter, drilling speed, and irrigation on temperature changes during implant osteotomies: an in vitro study,"
Clinical Oral Investigations, vol. 25, pp. 1047-1053, 2021, doi:
https://doi.org/10.1007/s00784-020-03398-y.
[17] Y. Reingewirtz, S. Szmukler‐Moncler, and B. Senger, "Influence of different parameters on bone heating and drilling time in implantology,"
Clinical oral implants research, vol. 8, no. 3, pp. 189-197, 1997, doi:
https://doi.org/10.1034/j.1600-0501.1997.080305.x.
[18] Ö. Pazarcı and F. Gündoğdu, "Temperature change during orthopedic drilling procedures: An experimental surgical internal fixation simulation study,"
Journal of Orthopaedics, vol. 46, pp. 58-63, 2023, doi:
https://doi.org/10.1016/j.jor.2023.10.013.
[19] M. Sarparast, M. Ghoreishi, T. Jahangirpoor, and V. Tahmasbi, "Modelling and optimisation of temperature and force behaviour in high-speed bone drilling,"
Biotechnology & Biotechnological Equipment, vol. 33, no. 1, pp. 1616-1625, 2019, doi:
https://doi.org/10.1080/13102818.2019.1684841.
[20] R. S. Abueshaghi, F. Setoudeha, V. Tahmasbi, M. Mohammadian, and G. Taheri, "Investigating and analyzing parameters affecting the bone drilling process using the Taguchi method," doi:
https://doi.org/10.61186/masm.4.1.139.
[21] A. Paul
et al., "High-Speed Swine Bone Drilling Parametric Optimization: Minimizing Temperature and Thrust Force using GRA and COPRAS Methods,"
Arabian Journal for Science and Engineering, pp. 1-18, 2025, doi:
https://doi.org/10.1007/s13369-025-10130-z.
[22] A. Gök, K. Gök, and M. A. Alkan, "The optimization of driller parameters for orthopedic surgery applications using multiobjective gray relational analysis and response surface method,"
Journal of Mechanics in Medicine and Biology, vol. 22, no. 04, p. 2250021, 2022, doi:
https://doi.org/10.1142/S021951942250021X.
[23] R. P. Singh, P. M. Pandey, A. R. Mridha, and T. Joshi, "Experimental investigations and statistical modeling of cutting force and torque in rotary ultrasonic bone drilling of human cadaver bone,"
Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, vol. 234, no. 2, pp. 148-162, 2020, doi:
https://doi.org/10.1177/0954411919889913.
[24] R. S. Abueshaghi, F. Setoudeh, and V. Tahmasbi, "Thermomechanical Dynamics and Statistical Optimization in Bone Drilling: A Systematic Review on Mitigating Thermal Necrosis Through Multiscale Modeling and Clinical Validation,"
Results in Engineering, p. 104923, 2025, doi:
https://doi.org/10.1016/j.rineng.2025.104923.
[25] G. Taheri, R. Saeidi Abueshaghi, F. Setoudeh, V. Tahmasbi, and M. Mohammadian, "Analysis and optimization of cortical bone drilling process based on stochastic optimization,"
Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine, p. 09544119251321134, 2024, doi:
https://doi.org/10.1177/09544119251321134.
[26] G. Pintér, G. Braunitzer, E. Nagy, K. Boa, J. Piffkó, and M. A. Antal, "Heat Generation During Guided Bone Drilling: Bone Trephine Versus Pilot Drill,"
Lubricants, vol. 13, no. 3, p. 115, 2025, doi:
https://doi.org/10.3390/lubricants13030115.
[27] E. P. de Kater, P. Breedveld, and A. Sakes, "Drilling around the corner: a comprehensive literature review of steerable bone drills,"
Frontiers in Medical Technology, vol. 7, p. 1426858, 2025, doi:
https://doi.org/10.3389/fmedt.2025.1426858.
[28] T. M. Keaveny, E. F. Morgan, and O. C. Yeh, "Bone mechanics,"
Standard handbook of biomedical engineering and design, pp. 8.1-8.23, 2004, doi:
https://doi.org/10.1146/annurev.bioeng.3.1.307.
