[1] H. Afshari, F. Taher, S. A. Alavi, M. Afshari, M. R. Samadi, and F. Allahyari, "Studying the effects of FDM process parameters on the mechanical properties of parts produced from PLA using response surface methodology,"
Colloid and Polymer Science, vol. 302, no. 6, pp. 955-970, 2024,
https://doi.org/10.1007/s00396-024-05246-x.
[2] A. Chalgham, A. Ehrmann, and I. Wickenkamp, "Mechanical properties of FDM printed PLA parts before and after thermal treatment,"
Polymers, vol. 13, no. 8, p. 1239, 2021,
https://doi.org/10.3390/polym13081239.
[3] A. Foorginejad, S. Khatibi, H. Torshizi, S. M. Emam, and H. Afshari, "Enhancement of Additive Manufacturing Processes for Thin-Walled Part Production Using Gas Metal Arc Welding (GMAW) with Wavelet Transform,"
Applied Sciences, vol. 14, no. 21, p. 9909, 2024,
https://doi.org/10.3390/app14219909.
[4] T. Yao, Z. Deng, K. Zhang, and S. Li, "A method to predict the ultimate tensile strength of 3D printing polylactic acid (PLA) materials with different printing orientations,"
Composites Part B: Engineering, vol. 163, pp. 393-402, 2019,
https://doi.org/10.1016/j.compositesb.2019.01.025.
[5] M. Afshari, S. Bakhshi, M. R. Samadi, and H. Afshari, "Optimizing the mechanical properties of TiO2/PA12 nano‐composites fabricated by SLS 3D printing,"
Polymer Engineering & Science, vol. 63, no. 1, pp. 267-280, 2023,
https://doi.org/10.1002/pen.26203.
[6] A. Zolfagharian, M. Lakhi, S. Ranjbar, M. Sayah Irani, M. Nafea, and M. Bodaghi, "4D printing parameters optimisation for bi-stable soft robotic gripper design,"
Journal of the Brazilian Society of Mechanical Sciences and Engineering, vol. 45, no. 4, p. 224, 2023,
https://doi.org/10.1007/s40430-023-04171-4.
[7] M. Mohammadi, A. Zolfagharian, M. Bodaghi, Y. Xiang, and A. Z. Kouzani, "4D printing of soft orthoses for tremor suppression," Bio-Design and Manufacturing, vol. 5, no. 4, pp. 786-807, 2022,
https://doi.org/10.1007/s42242-022-00199-y.
[8] S. T. Gobena and A. D. Woldeyohannes, "Comparative review on the application of smart material in additive manufacturing: 3D and 4D printing,"
Discover Applied Sciences, vol. 6, no. 7, p. 353, 2024,
https://doi.org/ 10.1007/s42452-024-05999-8.
[9] A. Kantaros, T. Ganetsos, and D. Piromalis, "3D and 4D printing as integrated manufacturing methods of industry 4.0," Kantaros, A., Ganetsos, T. & Piromalis, D.(2023).
3D and 4D Printing as Integrated Manufacturing Methods of Industry, vol. 4, pp. 12-22, 2023,
https://doi.org/ 10.3844/ajeassp.2023.12.22.
[10] E. Yarali et al., "Magneto‐/electro‐responsive polymers toward manufacturing, characterization, and biomedical/soft robotic applications,"
Applied Materials Today, vol. 26, p. 101306, 2022,
https://doi.org/10.1016/j.apmt.2021.101306.
[11] A. Zolfagharian, A. Kaynak, and A. Kouzani, "Closed-loop 4D-printed soft robots,"
Materials & Design, vol. 188, p. 108411, 2020,
https://doi.org/10.1016/j.matdes.2019.108411.
[12] R. Hamzehei, A. Serjouei, N. Wu, A. Zolfagharian, and M. Bodaghi, "4D metamaterials with zero poisson's ratio, shape recovery, and energy absorption features,"
Advanced Engineering Materials, vol. 24, no. 9, p. 2200656, 2022,
https://doi.org/10.1002/adem.202200656.
[13] J. Chen, C. Virrueta, S. Zhang, C. Mao, and J. Wang, "4D printing: the spotlight for 3D printed smart materials,"
Materials Today, 2024,
https://doi.org/10.1016/j.mattod.2024.06.004.
[14] Z. M. Jessop, A. Al-Sabah, M. D. Gardiner, E. Combellack, K. Hawkins, and I. S. Whitaker, "3D bioprinting for reconstructive surgery: principles, applications and challenges,"
Journal of Plastic, Reconstructive & Aesthetic Surgery, vol. 70, no. 9, pp. 1155-1170, 2017,
https://doi.org/10.1016/j.bjps.2017.06.001.
[15] J. An, C. K. Chua, and V. Mironov, "A perspective on 4D bioprinting,"
International Journal of Bioprinting, vol. 2, no. 1, 2016,
https://doi.org/10.18063/IJB.2016.01.003.
[16] H. Chu et al., "4D printing: a review on recent progresses,"
Micromachines, vol. 11, no. 9, p. 796, 2020,
https://doi.org/10.3390/mi11090796.
[17] S. Tibbits, "4D printing: multi‐material shape change,"
Architectural design, vol. 84, no. 1, pp. 116-121, 2014,
https://doi.org/10.1002/ad.1710.
[18] X. Kuang et al., "Advances in 4D printing: materials and applications,"
Advanced Functional Materials, vol. 29, no. 2, p. 1805290, 2019,
https://doi.org/10.1002/adfm.201805290.
[19] Z. X. Khoo et al., "3D printing of smart materials: A review on recent progresses in 4D printing,"
Virtual and Physical Prototyping, vol. 10, no. 3, pp. 103-122, 2015,
https://doi.org/10.1080/17452759.2015.1097054.
[20] A. Sydney Gladman, E. A. Matsumoto, R. G. Nuzzo, L. Mahadevan, and J. A. Lewis, "Biomimetic 4D printing,"
Nature materials, vol. 15, no. 4, pp. 413-418, 2016,
https://doi.org/10.1038/nmat4544.
[21] C. He, M. Zhang, and C. Guo, "4D printing of mashed potato/purple sweet potato puree with spontaneous color change,"
Innovative Food Science & Emerging Technologies, vol. 59, p. 102250, 2020,
https://doi.org/10.1016/j.ifset.2019.102250.
[22] A. S. Mathews, S. Abraham, S. K. Kumaran, J. Fan, and C. Montemagno, "Bio nano ink for 4D printing membrane proteins,"
RSC advances, vol. 7, no. 66, pp. 41429-41434, 2017,
https://doi.org/10.1039/C7RA07650A.
[23] C. M. Yakacki, R. Shandas, D. Safranski, A. M. Ortega, K. Sassaman, and K. Gall, "Strong, tailored, biocompatible shape‐memory polymer networks,"
Advanced functional materials, vol. 18, no. 16, pp. 2428-2435, 2008,
https://doi.org/10.1002/adfm.200701049.
[24] T. Xie, "Tunable polymer multi-shape memory effect,"
Nature, vol. 464, no. 7286, pp. 267-270, 2010,
https://doi.org/10.1038/nature08863.
[25] J. Wu et al., "Multi-shape active composites by 3D printing of digital shape memory polymers,"
Scientific reports, vol. 6, no. 1, p. 24224, 2016,
https://doi.org/10.1038/srep24224.
[26] N. Roudbarian, M. Baniasadi, P. Nayyeri, M. Ansari, R. Hedayati, and M. Baghani, "Enhancing shape memory properties of multi-layered and multi-material polymer composites in 4D printing,"
Smart Materials and Structures, vol. 30, no. 10, p. 105006, 2021,
https://doi.org/10.1088/1361-665X/ac1b3b.
[27] X. Wan, Y. He, Y. Liu, and J. Leng, "4D printing of multiple shape memory polymer and nanocomposites with biocompatible, programmable and selectively actuated properties,"
Additive Manufacturing, vol. 53, p. 102689, 2022,
https://doi.org/10.1016/j.addma.2022.102689.
[28] X. Wang, Y. He, Y. Liu, and J. Leng, "Advances in shape memory polymers: Remote actuation, multi-stimuli control, 4D printing and prospective applications,"
Materials Science and Engineering: R: Reports, vol. 151, p. 100702, 2022,
https://doi.org/10.1016/j.mser.2022.100702.
[29] F. Shadianlou, A. Foorginejad, and Y. Yaghoubinezhad, "Hydrothermal synthesis of zirconia-based nanocomposite powder reinforced by graphene and its application for bone scaffold with 3D printing,"
Advanced Powder Technology, vol. 33, no. 2, p. 103406, 2022,
https://doi.org/10.1016/j.apt.2021.103406.
[30] M. Javaid and A. Haleem, "4D printing applications in medical field: a brief review,"
Clinical Epidemiology and Global Health, vol. 7, no. 3, pp. 317-321, 2019,
https://doi.org/10.1016/j.cegh.2018.09.007.
[31] D. Niazy, M. Ashraf, M. Bodaghi, and A. Zolfagharian, "Resilient city perspective: 4D printing in art, architecture and construction,"
Materials Today Sustainability, p. 100708, 2024,
https://doi.org/10.1016/j.mtsust.2024.100708.
[32] H. Yi and Y. Kim, "Prototyping of 4D-printed self-shaping building skin in architecture: design, fabrication, and investigation of a two-way shape memory composite (TWSMC) façade panel,"
Journal of Building Engineering, vol. 43, p. 103076, 2021,
https://doi.org/10.1016/j.jobe.2021.103076.
[33] W. Gao et al., "The status, challenges, and future of additive manufacturing in engineering,"
Computer-aided design, vol. 69, pp. 65-89, 2015,
https://doi.org/10.1016/j.cad.2015.04.001.
[34] K. Ntouanoglou, P. Stavropoulos, and D. Mourtzis, "4D printing prospects for the aerospace industry: a critical review,"
Procedia manufacturing, vol. 18, pp. 120-129, 2018,
https://doi.org/10.1016/j.promfg.2018.11.016.
[35] A. Raina, M. I. U. Haq, M. Javaid, S. Rab, and A. Haleem, "4D printing for automotive industry applications,"
Journal of The Institution of Engineers (India): Series D, pp. 1-9, 2021,
https://doi.org/10.1007/s40033-021-00284-z.
[36] A. Foorginejad, M. Azargoman, V. Babaiyan, N. Mollayi, and M. Taheri, "Application of the extreme learning machine for modeling the bead geometry in gas metal arc welding process,"
AUT Journal of Modeling and Simulation, vol. 51, no. 2, pp. 121-130, 2019,
https://doi.org/10.22060/miscj.2019.15189.5127.
[37] F. Demoly and J.-C. André, "4D printing: bridging the gap between fundamental research and real-world applications,"
Applied Sciences, vol. 14, no. 13, p. 5669, 2024,
https://doi.org/10.3390/app14135669.
[38] X. Wan et al., "Recent Advances in 4D Printing of Advanced Materials and Structures for Functional Applications,"
Advanced Materials, p. 2312263, 2024,
https://doi.org/10.1002/adma.202312263.
[39] K. Belal, "Material modeling and design of soft robots,"
Benha Journal of Applied Sciences, vol. 9, no. 5, pp. 135-140, 2024,
https://doi.org/10.21608/bjas.2024.282799.1402.
[40] P. K. Shingo, M. I. Ahmed, R. Vijayanathan, P. Das, and M. M. R. Sakib, "Innovations and Challenges in Soft Robotic Dynamics: Advanced Modeling, Interaction, and Control Mechanisms,"
European Journal of Theoretical and Applied Sciences, vol. 2, no. 5, pp. 760-773, 2024,
https://doi.org/10.59324/ejtas.2024.2(5).67.
[41] A. Foorginejad, M. Azargoman, N. Mollayi, and M. Taheri, "Modeling of weld bead geometry using adaptive neuro-fuzzy inference system (ANFIS) in additive manufacturing,"
Journal of Applied and Computational Mechanics, vol. 6, no. 1, pp. 160-170, 2020,
https://doi.org/10.22055/JACM.2019.29077.1555.
[42] A. Foorginejad, S. Mohammad Emam, H. Jamshidi, and S. Ranjbar, "Image processing technique for measuring the weld dilution and heat-affected zone to model the gas metal arc welding process by a neuro-fuzzy system,"
Journal of Optical Technology, vol. 90, no. 12, pp. 743-752, 2023,
https://doi.org/10.1364/JOT.90.000743.
[43] H. Hardani, M. Afshari, F. Allahyari, M. R. Samadi, H. Afshari, and E. M. M. Medina, "Optimization of FFF process parameters to improve the tensile strength and impact energy of polylactic acid/carbon nanotube composite,"
Polymer Engineering & Science, vol. 64, no. 10, pp. 5047-5060, 2024,
https://doi.org/10.1002/pen.26900.
[44] H. Hardani, M. Afshari, M. R. Samadi, H. Afshari, and S. A. López, "An enhancement in the tensile modulus and bending resistance of polylactic acid/carbon nanotube composite by optimizing FFF process parameters,"
Journal of Thermoplastic Composite Materials, p. 08927057241268831, 2024,
https://doi.org/10.1177/08927057241268831.
[45] F. Taher, M. Afshari, A. Houmani, M. R. Samadi, S. Bakhshi, and H. Afshari, "Simultaneous enhancement of the impact strength and tensile modulus of PP/EPDM/TiO2 nanocomposite fabricated by fused filament fabrication,"
Colloid and Polymer Science, vol. 302, no. 3, pp. 393-407, 2024,
https://doi.org/10.1007/s00396-023-05209-8.
[46] V. Abdollahi, A. Foorginejad, K. Khalili, “Additive manufacturing and biomedical 3d printing,”
Mechanical Engineering, pp. 43-53, 2020, [in Persian] ,
https://doi.org/10.30506/mmep.2020.120314.1796.
[47] A. Andreu et al., "4D printing materials for vat photopolymerization,"
Additive Manufacturing, vol. 44, p. 102024, 2021,
https://doi.org/10.1016/j.addma.2021.102024.
[48] K. Ishfaq, M. Abdullah, and M. A. Mahmood, "A state-of-the-art direct metal laser sintering of Ti6Al4V and AlSi10Mg alloys: Surface roughness, tensile strength, fatigue strength and microstructure,"
Optics & Laser Technology, vol. 143, p. 107366, 2021,
https://doi.org/10.1016/j.optlastec.2021.107366.
[49] Z. Zhang, K. G. Demir, and G. X. Gu, "Developments in 4D-printing: a review on current smart materials, technologies, and applications,"
International Journal of Smart and Nano Materials, vol. 10, no. 3, pp. 205-224, 2019,
https://doi.org/10.1080/19475411.2019.1591541.
[50] Y. Q. Fu, W. M. Huang, J. Luo, and H. Lu, "Polyurethane shape-memory polymers for biomedical applications," in
Shape Memory Polymers for Biomedical Applications: Elsevier, 2015, pp. 167-195,
https://doi.org/10.1016/B978-0-85709-698-2.00009-X.
[51] Zhou, K., Zhang, Q., Gong, J., Shen, H., Luo, H., Chen, S., ... & Zhang, Y. (2024). Dynamic Non-Covalent Bonds Powering Enhanced Temporary Shape Retention Temperature and Mechanical Robustness in
Shape Memory Polyurethane. ACS Applied Materials & Interfaces, Vol. 16(46), pp. 64031-64041,
https://doi.org/10.1021/acsami.4c14965.
[52] M. P. Caputo, A. E. Berkowitz, A. Armstrong, P. Müllner, and C. V. Solomon, "4D printing of net shape parts made from Ni-Mn-Ga magnetic shape-memory alloys,"
Additive Manufacturing, vol. 21, pp. 579-588, 2018,
https://doi.org/10.1016/j.addma.2018.03.028.
[53] H. Lu et al., "Ultrahigh-performance TiNi shape memory alloy by 4D printing,"
Materials Science and Engineering: A, vol. 763, p. 138166, 2019,
https://doi.org/10.1016/j.msea.2019.138166.
[54] A. Jafarabadi, I. Ferretto, M. Mohri, C. Leinenbach, and E. Ghafoori, "4D printing of recoverable buckling-induced architected iron-based shape memory alloys,"
Materials & Design, vol. 233, p. 112216, 2023,
https://doi.org/10.1016/j.matdes.2023.112216.
[55] Y. Gao, Z. Jian, B. Wang, Z. Zhang, J. Jian, and Q. Gao, "4D forming shape memory component of Cu–13Al–5Fe alloy based on laser powder bed fusion of metal powders,"
Materials Science and Engineering: A, vol. 866, p. 144693, 2023,
https://doi.org/10.1016/j.msea.2023.144693.
[56] A. Milleret, "4D printing of Ni–Mn–Ga magnetic shape memory alloys: a review,"
Materials Science and Technology, vol. 38, no. 10, pp. 593-606, 2022,
https://doi.org/10.1080/02670836.2022.2062655.
[57] G. Liu et al., "4D additive–subtractive manufacturing of shape memory ceramics,"
Advanced Materials, vol. 35, no. 39, p. 2302108, 2023,
https://doi.org/10.1002/adma.202302108.
[58] S. Chen et al., "Lightweight and geometrically complex ceramics derived from 4D printed shape memory precursor with reconfigurability and programmability for sensing and actuation applications,"
Chemical Engineering Journal, vol. 455, p. 140655, 2023,
https://doi.org/10.1016/j.cej.2022.140655.
[59] S. Liu, X. Chen, and Y. Zhang, "Hydrogels and hydrogel composites for 3D and 4D printing applications," in
3D and 4D printing of polymer nanocomposite materials: Elsevier, 2020, pp. 427-465,
https://doi.org/10.1016/B978-0-12-816805-9.00014-4.
[60] S. Malekmohammadi et al., "Smart and biomimetic 3D and 4D printed composite hydrogels: opportunities for different biomedical applications,"
Biomedicines, vol. 9, no. 11, p. 1537, 2021,
https://doi.org/10.3390/biomedicines9111537.
[61] Y. Dong et al., "4D printed hydrogels: fabrication, materials, and applications,"
Advanced Materials Technologies, vol. 5, no. 6, p. 2000034, 2020,
https://doi.org/10.1002/admt.202000034.
[62] K. Nakamura, N. Di Caprio, and J. A. Burdick, "Engineered Shape‐Morphing Transitions in Hydrogels Through Suspension Bath Printing of Temperature‐Responsive Granular Hydrogel Inks,"
Advanced Materials, vol. 36, no. 47, p. 2410661, 2024,
https://doi.org/10.1002/adma.202410661.
[63] A. Abou-Okeil, R. Refaei, S. E. Moustafa, and H. M. Ibrahim, "Magnetic hydrogel scaffold based on hyaluronic acid/chitosan and gelatin natural polymers,"
Scientific Reports, vol. 14, no. 1, p. 28206, 2024,
https://doi.org/10.1038/s41598-024-78696-6.
[64] Y. Zhang et al., "4D printing of magnetoactive soft materials for on-demand magnetic actuation transformation,"
ACS applied materials & interfaces, vol. 13, no. 3, pp. 4174-4184, 2021,
https://doi.org/10.1021/acsami.0c19280.
[65] J. Lu, H. Cui, J. Xu, J. Zhang, and Z. Li, "4D printing technology based on magnetic intelligent materials: Materials, processing processes, and application,"
3D Printing and Additive Manufacturing, vol. 11, no. 3, pp. 1025-1041, 2024,
https://doi.org/10.1089/3dp.2023.0125.
[66] F. Shadianlou, A. Foorginejad, and Y. Yaghoubinezhad, "Fabrication of zirconia/reduced graphene oxide/hydroxyapatite scaffold by rapid prototyping method and its mechanical and biocompatibility properties,"
Ceramics International, vol. 48, no. 5, pp. 7031-7044, 2022,
https://doi.org/10.1016/j.ceramint.2021.11.261.
[67] H. Doostmohammadi, M. Baniassadi, M. Bodaghi, and M. Baghani, "4D Printing of Magneto‐Thermo‐Responsive PLA/PMMA/Fe3O4 Nanocomposites with Superior Shape Memory and Remote Actuation,"
Macromolecular Materials and Engineering, vol. 309, no. 9, p. 2400090, 2024,
https://doi.org/10.1002/mame.202400090.
[68] A. Y. Chen, E. Pegg, A. Chen, Z. Jin, and G. X. Gu, "4D printing of electroactive materials,"
Advanced Intelligent Systems, vol. 3, no. 12, p. 2100019, 2021,
https://doi.org/10.1002/aisy.202100019.
[69] H. Zhang et al., "4D printing of Ag nanowire-embedded shape memory composites with stable and controllable electrical responsivity: implications for flexible actuators,"
ACS Applied Nano Materials, vol. 5, no. 5, pp. 6221-6231, 2022,
https://doi.org/10.1021/acsanm.2c00264.
[70] H. Zhang et al., "4D printing of shape memory polymer nanocomposites for enhanced performances and tunable response behavior,"
European Polymer Journal, vol. 201, p. 112568, 2023,
https://doi.org/10.1016/j.eurpolymj.2023.112568.
[71] B. Du et al., "Recent development of photoresponsive materials toward 3D printing: From materials to application,"
Journal of Polymer Science, 2024,
https://doi.org/10.1002/pol.20240084.
[72] Y. Cao, Y. Wu, Y. Huang, H. Xiang, and L. Zhang, "Photo/thermal dual-responsive azobenzene-based photosensitive resin for 4D printing,"
Chemical Engineering Journal, vol. 498, p. 155140, 2024,
https://doi.org/10.1016/j.cej.2024.155140.
[73] Amisha, S. Thakur, and A. Singh, "Photo Responsive Material for 4D Printing in Tissue Engineering," in
Engineered Biomaterials: Synthesis and Applications: Springer, 2023, pp. 429-463,
https://doi.org/10.1007/978-981-99-6698-1_14.
[74] Z. Ren et al., "4D printing light-driven actuator with lignin photothermal conversion module,"
International Journal of Biological Macromolecules, vol. 253, p. 126562, 2023,
https://doi.org/10.1016/j.ijbiomac.2023.126562.
[75] N. Ahmed, R. Deffley, B. Kundys, and N. Morley, "3D printing of magnetostrictive property in 17/4 ph stainless steel,"
Journal of Magnetism and Magnetic Materials, vol. 585, p. 171115, 2023,
https://doi.org/10.1016/j.jmmm.2023.171115.
[76] M. Wajahat, J. H. Kim, J. H. Kim, I. D. Jung, J. Pyo, and S. K. Seol, "4D Printing of Ultrastretchable Magnetoactive Soft Material Architectures for Soft Actuators,"
ACS Applied Materials & Interfaces, vol. 15, no. 51, pp. 59582-59591, 2023,
https://doi.org/10.1021/acsami.3c12173.
[77] M. Barletta, A. Gisario, and M. Mehrpouya, "4D printing of shape memory polylactic acid (PLA) components: Investigating the role of the operational parameters in fused deposition modelling (FDM),"
Journal of Manufacturing Processes, vol. 61, pp. 473-480, 2021,
https://doi.org/10.1016/j.jmapro.2020.11.036.
[78] Y. S. Lui, W. T. Sow, L. P. Tan, Y. Wu, Y. Lai, and H. Li, "4D printing and stimuli-responsive materials in biomedical aspects,"
Acta biomaterialia, vol. 92, pp. 19-36, 2019,
https://doi.org/10.1016/j.actbio.2019.05.005.
[79] M. Navaf et al., "4D printing: A new approach for food printing; effect of various stimuli on 4D printed food properties. A comprehensive review,"
Applied Food Research, vol. 2, no. 2, p. 100150, 2022,
https://doi.org/10.1016/j.afres.2022.100150.
[80] A. Mandal and K. Chatterjee, "Emerging trends in humidity-responsive 4D bioprinting,"
Chemical Engineering Journal, vol. 455, p. 140550, 2023,
https://doi.org/10.1016/j.cej.2022.140550.
[81] K. Kim et al., "4D printing of hygroscopic liquid crystal elastomer actuators,"
Small, vol. 17, no. 23, p. 2100910, 2021,
https://doi.org/10.1002/smll.202100910.
[82] M. Mehrpouya and W. M. Huang, "Origami-inspired 4D printing," in
Smart Materials in Additive Manufacturing: Elsevier, pp. 373-394, 2022,
https://doi.org/10.1016/B978-0-12-824082-3.00002-7.
[83] F. K. Aldawood, "A comprehensive review of 4D printing: state of the arts, opportunities, and challenges," in
Actuators, vol. 12, no. 3, p. 101: MDPI, 2023,
https://doi.org/10.3390/act12030101.
[84] A. Zolfagharian, A. Kaynak, A. Noshadi, and A. Z. Kouzani, "System identification and robust tracking of a 3D printed soft actuator,"
Smart Materials and Structures, vol. 28, no. 7, p. 075025, 2019,
https://doi.org/10.1088/1361-665X/ab1cce.
[85] H. A. Alshahrani, "Review of 4D printing materials and reinforced composites: Behaviors, applications and challenges,"
Journal of Science: Advanced Materials and Devices, vol. 6, no. 2, pp. 167-185, 2021,
https://doi.org/10.1016/j.jsamd.2021.03.006.
[86] S. S. Mohol and V. Sharma, "Functional applications of 4D printing: a review,"
Rapid Prototyping Journal, vol. 27, no. 8, pp. 1501-1522, 2021,
https://doi.org/10.1108/RPJ-10-2020-0240.
[87] K. Osouli-Bostanabad et al., "Traction of 3D and 4D printing in the healthcare industry: from drug delivery and analysis to regenerative medicine,"
ACS Biomaterials Science & Engineering, vol. 8, no. 7, pp. 2764-2797, 2022,
https://doi.org/10.1021/acsbiomaterials.2c00094.
[88] A. Ahmed, S. Arya, V. Gupta, H. Furukawa, and A. Khosla, "4D printing: Fundamentals, materials, applications and challenges,"
Polymer, vol. 228, p. 123926, 2021,
https://doi.org/10.1016/j.polymer.2021.123926.
[89] X. Li, J. Shang, and Z. Wang, "Intelligent materials: a review of applications in 4D printing,"
Assembly Automation, vol. 37, no. 2, pp. 170-185, 2017,
https://doi.org/10.1108/AA-11-2015-093.
[90] K. L. Ameta, V. S. Solanki, V. Singh, A. P. Devi, R. Chundawat, and S. Haque, "Critical appraisal and systematic review of 3D & 4D printing in sustainable and environment-friendly smart manufacturing technologies,"
Sustainable Materials and Technologies, vol. 34, p. e00481, 2022,
https://doi.org/10.1016/j.susmat.2022.e00481.
[91] J. Choi, O.-C. Kwon, W. Jo, H. J. Lee, and M.-W. Moon, "4D printing technology: a review,"
3D Printing and Additive Manufacturing, vol. 2, no. 4, pp. 159-167, 2015,
https://doi.org/10.1089/3dp.2015.0039.
[92] F. Momeni and J. Ni, "Nature-inspired smart solar concentrators by 4D printing,"
Renewable Energy, vol. 122, pp. 35-44, 2018,
https://doi.org/10.1016/j.renene.2018.01.062.
[93] J. V. Vaghasiya and M. Pumera, "The rise of 3D/4D-printed water harvesting materials,"
Materials Today, 2024,
https://doi.org/10.1016/j.mattod.2024.06.007.
[94] K. R. Hossain et al., "Application of 3D printing technology in the military," Journal of Chemistry Letters, vol. 4, no. 2, pp. 103-116, 2023, https://doi.org/10.22034/jchemlett.2023.395069.1113.
[95] M. Bisić and A. Pandžić, "Advances in Additive Manufacturing Application in Military Industry," in
International Conference of Experimental and Numerical Investigations and New Technologies, 2023, pp. 168-187, Springer,
https://doi.org/10.1007/978-3-031-46432-4_14.
[96] A. Sözen and G. Neşer, "A Critical Systematic Scoping Review on the Applications of Additive Manufacturing (AM) in the Marine Industry,"
Polymers, vol. 17, no. 1, p. 4, 2024,
https://doi.org/10.3390/polym17010004.
[97] C. Lee et al., "Soft robot review,"
International Journal of Control, Automation and Systems, vol. 15, pp. 3-15, 2017,
https://doi.org/10.1007/s12555-016-0462-3.
[98] C. Tawk and G. Alici, "A review of 3D‐printable soft pneumatic actuators and sensors: research challenges and opportunities,"
Advanced Intelligent Systems, vol. 3, no. 6, p. 2000223, 2021,
https://doi.org/10.1002/aisy.202000223.
[99] X. Zhai, L. Jin, and J. Jiang, "A survey of additive manufacturing reviews,"
Materials Science in Additive Manufacturing, vol. 1, no. 4, p. 21, 2022,
https://doi.org/10.18063/msam.v1i4.21.
[100] S. Li, D. M. Vogt, D. Rus, and R. J. Wood, "Fluid-driven origami-inspired artificial muscles,"
Proceedings of the National academy of Sciences, vol. 114, no. 50, pp. 13132-13137, 2017,
https://doi.org/10.1073/pnas.1713450114.
[101] J. Jiao et al., "Stiffness-tunable and shape-locking soft actuators based on 3D-printed hybrid multi-materials,"
Soft Science, vol. 2, no. 4, p. 20, 2022,
https://doi.org/10.20517/ss.2022.19.
[102] A. Pagoli, F. Chapelle, J.-A. Corrales-Ramon, Y. Mezouar, and Y. Lapusta, "Review of soft fluidic actuators: Classification and materials modeling analysis,"
Smart Materials and Structures, vol. 31, no. 1, p. 013001, 2021,
https://doi.org/10.1088/1361-665X/ac383a.
[103] A. Prituja, H. Banerjee, and H. Ren, "Electromagnetically enhanced soft and flexible bend sensor: A quantitative analysis with different cores,"
IEEE Sensors Journal, vol. 18, no. 9, pp. 3580-3589, 2018,
https://doi.org/10.1109/JSEN.2018.2817211.
[104] T. George Thuruthel, Y. Ansari, E. Falotico, and C. Laschi, "Control strategies for soft robotic manipulators: A survey,"
Soft robotics, vol. 5, no. 2, pp. 149-163, 2018,
https://doi.org/10.1089/soro.2017.0007.
[105] A. Melingui, O. Lakhal, B. Daachi, J. B. Mbede, and R. Merzouki, "Adaptive neural network control of a compact bionic handling arm,"
IEEE/ASME Transactions on Mechatronics, vol. 20, no. 6, pp. 2862-2875, 2015,
https://doi.org/10.1109/TMECH.2015.2396114.
[106] P. Qi, C. Liu, A. Ataka, H.-K. Lam, and K. Althoefer, "Kinematic control of continuum manipulators using a fuzzy-model-based approach,"
IEEE Transactions on Industrial Electronics, vol. 63, no. 8, pp. 5022-5035, 2016,
https://doi.org/10.1109/TIE.2016.2554078.
[107] A. Foorginejad and M. Lakhi, "Designing and creating a mouse using nature-inspired shapes,"
Journal of Applied and Computational Mechanics, vol. 6, no. 4, pp. 841-847, 2020,
https://doi.org/10.22055/JACM.2019.29701.1628.
[108] B. A. W. Keong and R. Y. C. Hua, "A novel fold‐based design approach toward printable soft robotics using flexible 3D printing materials,"
Advanced Materials Technologies, vol. 3, no. 2, p. 1700172, 2018,
https://doi.org/10.1002/admt.201700172.
[109] S. Leanza, J. Lu‐Yang, B. Kaczmarski, S. Wu, E. Kuhl, and R. R. Zhao, "Elephant Trunk Inspired Multimodal Deformations and Movements of Soft Robotic Arms,"
Advanced Functional Materials, p. 2400396, 2024,
https://doi.org/10.1002/adfm.202400396.
[110] B. Sparrman et al., "Printed silicone pneumatic actuators for soft robotics,"
Additive Manufacturing, vol. 40, p. 101860, 2021,
https://doi.org/10.1016/j.addma.2021.101860.
[111] M. Mehrpouya, A. Azizi, S. Janbaz, and A. Gisario, "Investigation on the functionality of thermoresponsive origami structures,"
Advanced Engineering Materials, vol. 22, no. 8, p. 2000296, 2020,
https://doi.org/10.1002/adem.202000296.
[112] X. Huang et al., "4D Printing Hybrid Soft Robots Enabled by Shape‐Transformable Liquid Metal Nanoparticles,"
Advanced Materials, vol. 36, no. 46, p. 2409789, 2024,
https://doi.org/ 10.1002/adma.202409789.
[113] D. Kehret, S. Junk, H. Einloth, and B. E. Rapp, "4D printing of magnetoresponsive soft gripper and phenomenological approach for required magnetical actuation field,"
The International Journal of Advanced Manufacturing Technology, pp. 1-13, 2024,
https://doi.org/ 10.1007/s00170-024-14605-5.
[114] A. Zolfagharian et al., "Silicon-based soft parallel robots 4D printing and multiphysics analysis,"
Smart Materials and Structures, vol. 31, no. 11, p. 115030, 2022,
https://doi.org/ 10.1088/1361-665X/ac976c.
[115] A. Zolfagharian, L. Durran, S. Gharaie, B. Rolfe, A. Kaynak, and M. Bodaghi, "4D printing soft robots guided by machine learning and finite element models,"
Sensors and Actuators A: Physical, vol. 328, p. 112774, 2021,
https://doi.org/ 10.1016/j.sna.2021.112774.
[116] L. Ren et al., "4D Printed Self‐Sustained Soft Crawling Machines Fueled by Constant Thermal Field,"
Advanced Functional Materials, p. 2400161, 2024,
https://doi.org/ 10.1002/adfm.202400161.
[117] X. Xia et al., "4D-Printed Bionic Soft Robot with Superior Mechanical Properties and Fast Near-Infrared Light Response,"
ACS Applied Polymer Materials, vol. 6, no. 6, pp. 3170-3178, 2024,
https://doi.org/10.1021/acsapm.3c02936.
[118] A. Zolfagharian, M. Denk, M. Bodaghi, A. Z. Kouzani, and A. Kaynak, "Topology-optimized 4D printing of a soft actuator,"
Acta Mechanica Solida Sinica, vol. 33, pp. 418-430, 2020,
https://doi.org/10.1007/s10338-019-00137-z.
