[1] V. Dhir, "Boiling heat transfer,"
Annual review of fluid mechanics, vol. 30, no. 1, pp. 365-401, , 1998,
https://doi.org/10.1146/annurev.fluid.30.1.365.
[2] H. Jo, H. S. Park, and M. H. Kim, "Single bubble dynamics on hydrophobic–hydrophilic mixed surfaces,"
International Journal of Heat and Mass Transfer, vol. 93, pp. 554-565, 2016,
https://doi.org/10.1016/j.ijheatmasstransfer.2015.09.031.
[3] V. K. Dhir, G. R. Warrier, and E. Aktinol, "Numerical simulation of pool boiling: a review,"
Journal of Heat Transfer, vol. 135, no. 6, p. 061502, 2013,
https://doi.org/10.1115/1.4023576.
[4] J. Shi, X. Jia, D. Feng, Z. Chen, and C. Dang, "Wettability effect on pool boiling heat transfer using a multiscale copper foam surface,"
International Journal of Heat and Mass Transfer, vol. 146, p. 118726, 2020,
https://doi.org/10.1016/j.ijheatmasstransfer.2019.118726.
[5] H. Jiang, N. Xu, D. Wang, X. Yu, and H. Chu, "Experimental investigation of the effect of cylindrical array structure on heat transfer performance during nucleate boiling,"
International Journal of Heat and Mass Transfer, vol. 174, p. 121319, 2021,
https://doi.org/10.1016/j.ijheatmasstransfer.2021.121319.
[6] P. Karki, D. A. Perumal, and A. K. Yadav, "Comparative studies on air, water and nanofluids based Rayleigh–Benard natural convection using lattice Boltzmann method: CFD and exergy analysis,"
Journal of Thermal Analysis and Calorimetry, vol. 147, no. 2, pp. 1487-1503, 2022,
https://doi.org/10.1007/s10973-020-10496-2.
[7] G. Narendran, N. Gnanasekaran, D. A. Perumal, M. Sreejesh, and H. Nagaraja, "Integrated microchannel cooling for densely packed electronic components using vanadium pentaoxide (V2O5)-xerogel nanoplatelets-based nanofluids,"
Journal of Thermal Analysis and Calorimetry, vol. 148, no. 6, pp. 2547-2565, 2023,
https://doi.org/10.1007/s10973-022-11925-0.
[8] B. Dikici and B. Q. Al-Sukaini, "Comparisons of Structured Surface Floors for Pool Boiling Enhancement at Low Heat Fluxes: Hands-On Learning Setup for Heat Transfer Classroom,"
World Journal of Engineering and Technology, vol. 11, no. 2, pp. 303-318, 2023,
https://doi.org/10.4236/wjet.2023.112022.
[9] N. Rahul, S. Kalita, P. Sen, B. Shil, and D. Sen, "Enhanced pool boiling heat transfer characteristics on microstructured copper surfaces coated with hybrid nanofluid,"
Journal of Thermal Analysis and Calorimetry, pp. 1-13, 2024,
https://doi.org/10.1007/s10973-024-13033-7.
[10] B. Dong, Y. Zhang, X. Zhou, C. Chen, and W. Li, "Numerical simulation of bubble dynamics in subcooled boiling along inclined structured surface,"
Journal of Thermophysics and Heat Transfer, vol. 35, no. 1, pp. 16-27, 2021,
https://doi.org/10.2514/1.T5906.
[11] Y. Huang, Y. Tian, W. Ye, W. Li, J. Lei, and Y. Zhang, "Enhancing Pool Boiling Heat Transfer by Structured Surfaces–A Lattice Boltzmann Study,"
Journal of Applied Fluid Mechanics, vol. 15, no. 1, pp. 139-151, 2021,
https://doi.org/10.47176/jafm.15.01.32731.
[12] I. Pranoto, M. A. Rahman, C. D. Wicaksana, A. E. Wibisono, Fauzun, and A. Widyatama, "Flow Boiling Heat Transfer Performance and Boiling Phenomena on Various Straight Fin Configurations,"
Fluids, vol. 8, no. 3, p. 102, 2023,
https://doi.org/10.3390/fluids8030102.
[13] C. Falsetti, J. Chetwynd-Chatwin, and E. J. Walsh, "Performance of pin-fin structures on pool boiling heat transfer,"
International Journal of Thermofluids, vol. 23, p. 100784, 2024,
https://doi.org/10.1016/j.ijft.2024.100784.
[14] J. U. Brackbill, D. B. Kothe, and C. Zemach, "A continuum method for modeling surface tension,"
Journal of computational physics, vol. 100, no. 2, pp. 335-354, , 1992,
https://doi.org/10.1016/0021-9991(92)90240-Y.
[15] R. P. Fedkiw, T. Aslam, B. Merriman, and S. Osher, "A non-oscillatory Eulerian approach to interfaces in multimaterial flows (the ghost fluid method),"
Journal of computational physics, vol. 152, no. 2, pp. 457-492, , 1999,
https://doi.org/10.1006/jcph.1999.6236.
[16] H. Wang, Q. Lou, H. Liang, and L. Li, "Numerical simulation of bubble dynamics and heat transfer in the 2D saturated pool boiling from a circular surface,"
International Journal of Thermal Sciences, vol. 170, p. 107098, 2021,
https://doi.org/10.1016/j.ijthermalsci.2021.107098.
[17] Z. A. Khan, N. Ahmad, M. Sattar, M. A. Haq, I. Khan, and A. H. Ganie, "Cell alternation algorithm for simulating bubble growth in boiling flows through volume of fluid (VOF) method in fluent,"
Alexandria Engineering Journal, vol. 61, no. 12, pp. 13051-13066, 2022,
https://doi.org/10.1016/j.aej.2022.06.059.
[18] R. Jaswal, A. Sathyabhama, K. Singh, and A. P. Yandapalli, "Experimental and numerical investigation of pool boiling heat transfer from finned surfaces,"
Applied Thermal Engineering, vol. 233, p. 121167, (2023),
https://doi.org/10.1016/j.applthermaleng.2023.121167.
[19] K. Jagannath, A. Kotian, S. Sharma, A. Kini, and P. Prabhu, "Investigation of Bubble Growth during Nucleate Boiling Using CFD,"
International Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering, vol. 9, no. 6, pp. 988-992, 2015,
https://doi.org/10.5281/zenodo.1107353.
[20] A. Fluent, "Ansys fluent theory guide," Ansys Inc., USA, vol. 15317, pp. 724-746, 2011.
[21] W. H. Lee, "A pressure iteration scheme for two-phase flow modeling,"
Multiphase transport fundamentals, reactor safety, applications, vol. 1, pp. 407-431, , 1980,
https://codethatflows.wordpress.com/wp-content/uploads/2021/08/406441216-lee-model-pdf-1.pdf.
[22] A. Alizadehdakhel, M. Rahimi, and A. A. Alsairafi, "CFD modeling of flow and heat transfer in a thermosyphon,"
International Communications in Heat and Mass Transfer, vol. 37, no. 3, pp. 312-318, , 2010,
https://doi.org/10.1016/j.icheatmasstransfer.2009.09.002.
[23] S. C. De Schepper, G. J. Heynderickx, and G. B. Marin, "Modeling the evaporation of a hydrocarbon feedstock in the convection section of a steam cracker,"
Computers & Chemical Engineering, vol. 33, no. 1, pp. 122-132, , 2009,
https://doi.org/10.1016/j.compchemeng.2008.07.013.
[24] H. Wu, X. Peng, P. Ye, and Y. E. Gong, "Simulation of refrigerant flow boiling in serpentine tubes,"
International Journal of Heat and Mass Transfer, vol. 50, no. 5-6, pp. 1186-1195, , 2007,
https://doi.org/10.1016/j.ijheatmasstransfer.2006.10.013.
[25] H. Alimoradi, S. Zaboli, and M. Shams, "Numerical simulation of surface vibration effects on improvement of pool boiling heat transfer characteristics of nanofluid,"
Korean Journal of Chemical Engineering, vol. 39, no. 1, pp. 69-85, 2022,
https://doi.org/10.1007/s11814-021-0895-0.
[26] V. P. Carey, Liquid-vapor phase-change phenomena: an introduction to the thermophysics of vaporization and condensation processes in heat transfer equipment. CRC Press, 2020, https://doi.org/10.1201/9780429082221.
[27] W. Rohsenow, J. Hartnett, and T. Cho, "Handbook of Heat Transfer McGraw Hill," New York, 1973.
[28] M. Colombo and M. Fairweather, "Multiphase turbulence in bubbly flows: RANS simulations,"
International Journal of Multiphase Flow, vol. 77, pp. 222-243, 2015,
https://doi.org/10.1016/j.ijmultiphaseflow.2015.09.003.
[29] S. Ramezani and S. Talebi, "Numerical Simulation of Pool Boiling on a Horizontal Grooved Surface,"
Scientific Journal of the Iranian Society of Mechanical Engineers, vol. 24, no. 2, pp. 77-91, 2022 [in persian],
https://doi.org/10.30506/ijmep.2022.543011.1835.
[30] G. S. Kell, "Density, thermal expansivity, and compressibility of liquid water from 0.deg. to 150.deg.. Correlations and tables for atmospheric pressure and saturation reviewed and expressed on 1968 temperature scale,"
Journal of Chemical & Engineering Data, vol. 20, no. 1, pp. 97-105, 2002,
https://doi.org/10.1021/je60064a005.
[31] G. H. Yeoh and J. Tu, "Computational techniques for multiphase flows," 2019,
https://doi.org/10.1016/C2017-0-01655-5.
